I. Problem introduction
"
Exceeding the traffic limit", As shown in the following figure:
At this time, the terminal cannot connect to the vro.
II. Causes and solutions
The TR series routers support the traffic limit function. The vro sets a traffic limit and enables automatic network disconnection when the limit is exceeded. If the cumulative traffic exceeds the limit, the vro automatically loses the network.
Solution: You can select either of the following three methods.
1. Disable the excessive automatic network disconnection function;
2. Increase the traffic limit value;
3. Disable the traffic limit function.
Because the vro setting interface of different models may be different, the traffic limit function can be set as follows:
1
TR761 Series Routers
In the vro management interface
Advanced Settings
>
System Tools
>
Statistics settings,
Traffic limit
Select
EnableAnd set the traffic limit,
The network is automatically disconnected when the quota is exceeded.Select
Enable, As shown in the following figure:
2
TR961 Series Routers
Log on to the vro management page and click
Advanced Settings
>
Traffic statistics,
Quota switchSelect
Enable,
Quota typeSelect
Traffic limit, Set the traffic limit,
Enable automatic network disconnectionAnd click
Save, As shown in the following figure:
