One-click unlocking and cracking process for Apple iPhone (new)

There are already a lot of detailed online procedures. We suggest you take a look at them before cracking them. I am talking about a few things to pay attention to. I 've been surfing the Internet over the past few days, and I feel like I 've got my camera today and I 've got it for three hours.

Basic Process:

1. After obtaining the new host, you must first crack it before entering the system. If you cannot enter the system, itunne cannot be updated to 1.02. Even if you enable ibrickr, you will be prompted that you need to crack the new host before entering the system.

2. Install itunne7.3. After installation, plug the iPhone into your computer. At this time, you will be prompted to find the hardware and turn itunne on automatically. Disable it first.

3. Enter winstaller, run the winstallergui file, and click jailbreak. At this time, you will find that the software automatically downloads the Rom. You don't have to worry about it. Wait until the download is completed (91 MB), and then start cracking, wait until you see * complete, so that the software is cracked and you can enter the system.

4. Shut down winstaller and run itunne. At this time, you will see the software requirement to update Rom. If you click Update, an error will be reported, and the iPhone cannot enter. Don't worry, restart your computer and connect to the iPhone again, at this time, you will be prompted to request recovery and update, and click confirm (Note: At this time, the software is required to be upgraded to 7.4, this point is not ). Wait for the download of 1.02 MB. After the download, install and update the device. At this time, the iPhone system is and it is restored to the inactive status.

5. Enter winstaller again, run the winstallergui file, and click jailbreak. At this time, the software will not be automatically downloaded, and the attack will be cracked directly, waiting for * complete. Then the system will be cracked.

6. Click Install and select unlock. APP folder (Remember, this folder contains 8 files, do not have a root folder in it). At this time, copy the file and restart it once until you see * complete.

7. Run ibrickr. At this time, go to the menu and click app *** (the link to install the software). Then install pxl. After installation, you will see another button (then restart, make sure to restart). After the button is restarted, you will see the next button (then restart), and then click this button to complete the installation, the last button is check for pxl. When we see the Browse app button, this step is complete and ibrickr is disabled.

8. Go to the mobile phone system, click setting, disable auto lock, and change it to never.

9. Click "unlock", open the software, and click "start". wait 20 minutes and you will see "completed.

10. Run ibrickr and send lockdownd to USR/libexec/on the phone. Restart the client to complete all the attacks.

Then you can insert your SIM card, followed by Chinese:

After you have plugged in your cell phone, follow the instructions to start step by step. Note that you need to restart each step before you can proceed to the next step. Otherwise, the mobile phone will not succeed! (Author: foam103)

Download winstaller Software

ArticleCopyright from http://iphone.tgbus.com owned by original author