Photoshop adds brilliant glow to people under the trees

The process of increasing the color of the picture is relatively simple, roughly divided into three steps: First, the main colors into warm, dark can add some cool colors, and then replace the Sky section, increase the light material, the later rendering of high lighting, strengthen the lighting can be.

Original

Final effect

1. Open the picture of the material, create the optional Color adjustment layer, adjust the green, the parameters and effect as shown below. This step darkens the green in the picture.

< map 1>

< map 2>

2, press CTRL + J to copy the current optional color adjustment layer, the effect of the following figure.

< map 3>

3, the creation of optional color adjustment layer, yellow, green, white, black to adjust, parameter settings such as Figure 4-7, the effect is shown in Figure 8. This step mainly turns the yellow-green in the picture to orange-yellow, the high light area increases the light blue.

< map 4>

< map 5>

< map 6>

< map 7>

< map 8>

4, press CTRL + ALT + 2 to bring up the high light selection, press CTRL + Shift + I to select the dark selection, and then create a curve adjustment layer, RGB, green, blue channel adjustment, parameter settings such as Figure 9, the effect is as Figure 10. This step darkens the dark part of the picture and adds Blue.

< map 9>

< map 10>

5, press CTRL + J to copy the current curve adjustment layer, and press CTRL + ALT + G to create a clipping mask, the effect of the following figure.

< map 11>

6, create a color balance adjustment layer, the shadow, highlight adjustment, parameter settings such as Figure 12,13, after the creation of a clipping mask, the effect is shown in Figure 14. This step adds blue to the dark part.

< map 12>

< map 13>

< map 14>

7, create an optional color adjustment layer, the yellow adjustment, parameter settings such as Figure 15, determined to create a clipping mask, the effect is shown in Figure 16. This step adds orange red to the dark part.

< map 15>

< map 16>

8, create brightness/Contrast adjustment layer, greatly increase the brightness and contrast, parameter settings such as Figure 17, after the creation of a clipping mask, and then the mask filled with black, with a low transparency soft edge white brush to wipe out the area shown in Figure 18. This step increases the local brightness of the dark part.

< map 17>

< map 18>

9, create a new layer, creating a clipping mask, using the Lasso tool to check out the selection shown in the following figure, feather 35 pixels after the fill orange: #F7A238, remove the selection after the blending mode to "soft light", the effect of the following figure. This step adds a warm color to the dark part.

< map 19>

10, now to deal with the sky part. Copy the background layer one layer, press CTRL + Shift +] top, as shown below.

< map 20>

11. Enter the channel panel, copy the blue channel and get the blue copy channel. Press CTRL + M to adjust the curve of the blue copy channel, darken The dark, highlight the area, the effect is as follows.

< map 21>

12, set the foreground color to black, and then use the brush to paint the area outside the sky black, as shown below.

< map 22>

13, hold down CTRL + the left mouse button click on the channel panel blue copy channel thumbnail load selection; point RGB channel return to the Layers panel. Create a new layer, fill the white with the paint bucket tool, hide the background copy layer after canceling the selection, and the effect is shown below.

< map 23>

Classification:

• PS Palette Tutorial