PowerPoint production drop-down menu

1. First, draw a rectangular box and set its size to 6.2 cm in height and 5.2 cm in width.

2. Draw a rectangle and set the size to 6 cm in height and 5 cm in width.

3. Combine the top edge and left side, and then combine them so that the two objects become one object.

The procedure is as follows: place the smaller rectangle frame on the larger Rectangle frame and drag the smaller one to the larger one. You can also use the following method: Set the position of the large rectangle frame to horizontal: 1 cm, vertical: 2 cm, and small: the same position, so that they overlap.

Select a Large Rectangular Box (the one below), hold down the Shift key, and click the small rectangular box, right-click and choose combination.

4. Draw a rectangle frame with a height of 1.2 cm and a width of 5.8 cm. Position: horizontal: 0.65 cm, vertical: 0.8 cm.

Right-click the rectangle, select "Add text", and enter "menu ".

5. Add menu items

1. Draw a rectangular box with the following sizes: Height: 1.2, width: 5, position: horizontal: 1, vertical: 2. Add the text as "Homepage"

2. Repeat 1 and change the position to horizontal: 1 and vertical: 3.2. Add the text "Import language ".

3. Draw three more rectangular boxes, just follow the steps above to change the position and text, and do not describe them again.

6. Set the animation

Right-click the created object and select "Custom Animation". The task pane of "Custom Animation" appears (only available in Versions later than PPT 2002, you can take a rest for versions earlier than 2000. It is not supported ),

Select a combo box (two large rectangular boxes that have been combined to form an object), click "add effect"-> "go"-> "other effects", and select "cut in ", are you sure you want to return. Change the direction to "from top" (you only need to click the "direction" drop-down arrow in the task pane to select ).

Set the trigger. in the lower part of the task pane, the first animation object is displayed. Click it (selected). Then, click the drop-down arrow on its right and select "Timing". A dialog box is displayed. Click the trigger button, select one of the following single-choice buttons, and click the drop-down arrow on the right of the trigger to select "rectangle 5: menu" to return.

The drop-down animation of the trigger of a combo box is complete.

Next, we will perform other drop-down animation settings for object triggers:

Select the "Homepage" rectangular box and follow the steps above for repeated settings. Modify only the following parts:

After the settings are complete, the "Homepage" animation is "clicked". Therefore, you need to modify the animation. Select the "Homepage" animation in the task pane, click the drop-down arrow on the right of the animation, and select the "Start from above" command (or directly click the "Start" drop-down arrow in the upper part of the task pane, select "after", the same below ).

The drop-down animation settings for the "Homepage" are completed.

Select the "Import language" rectangular box and add a drop-down animation. The settings are the same as those on the "Homepage", but you need to change "click" to "previous", which means: make the "Homepage" and "Import language" animations at the same time.

The following menu items are exactly the same as the "Import language.

7. Set exit Animation

The setup process is basically the same as that of section 6,

First, select the "combo box" and click "add effect"-> select the "exit" command (Note: 6. Select "enter". Here, select "exit "), select "cut out" in "Exit Animation" and set its trigger to "Rectangle frame 5: menu", which is the same as above. The animation direction is "to the top", starts to "click", and then selects the "Homepage" rectangular box to add the "exit" animation effect. The trigger is still "Rectangle frame 5: menu ", change "click" to "after", and set other menu items to "before". The setting method is the same as that of "6.

8. add multiple slides

Press Ctrl + M 4 times to add four slides and add appropriate text to each slide.

Select the menu slide (that is, the first one) that you just created, select the Rectangular Box object on the "Homepage", click "Slide Show", select the "Action Settings" command, and hyperlink to the first slide, similarly, each other menu object is superconnected to the corresponding slide.

Select all the objects in the first animation menu and copy and paste them to all the slides. This is a success.

Attached attachment: http://gworld.lingd.net/attachment.php? Id = 37925

Reference from: