Promulgation and significance of cat6 Cabling Standards

The release of cat6 standards allows many users and application developers who have doubts about cat6 cabling to install cat6 cabling systems with confidence. When there is no standard, it is difficult for manufacturers and system integrators to persuade users that there are six types of cabling systems they provide. In addition, it is difficult for users to evaluate and identify cabling products. Therefore, the introduction of the six categories of standards has solved the problems of users, manufacturers, and system integrators.

1. Sign of maturity of category 6 Products:

With the continuous improvement of technology and production in the past few years, most of the six types of products of wiring manufacturers have matured, which prompted the formal adoption of the final standard. So what is its significance for users? With the official standards of category 6, it indicates that its products are relatively mature. Therefore, users can select the category 6 Products with confidence. In addition, after six types of products are installed, formal standards can be used for certification testing, which guarantees reliability.

2. Standard consistency:

The new standard has an important feature, that is, the 568B standard in North America is very close to the ISO standard in Europe, and the difference between the two is very small. In this way, the actual operation is very convenient. No matter which standard is used, it is acceptable. In the past, when one of the standard tests was used and the results were passed, the other standard tests would not be passed.

3. test model changes:

In the past, the adapters of different wiring manufacturers had their own characteristics. the engineers of the testing manufacturers needed to carry a lot of plug-ins to test the products of different wiring manufacturers. After the permanent link model passes, a common adapter becomes possible. In the past, users used to select cabling products. They only needed to deploy links and perform on-site tests from different manufacturers. In addition, each manufacturer has its own label and lacks a Uniform Specification for comparison. Now the tester has a uniform specification. In the past, the wiring manufacturers and testing manufacturers preset the standard draft in the product, and now there are clear standards for evaluation. Under the same standard, the same tester can be used to test products of different wiring manufacturers, which makes the test more meaningful.

4. Stricter construction techniques:

Installation of excellent cat6 cabling works requires strict construction techniques. The link margin of category 6 systems is very small. Generally, the NEXT margin of the link is only two to five DBS (related to the link length ), it is difficult to obtain the successful test results by using five types of construction technology. For example, many cat6 cables use high quality and lighter axis to reduce the tension of the cable. In addition, cable distortion and extrusion may have adverse consequences. During the construction process, the use of inferior tools, clamp, and knife will degrade the performance of the link, thus failing to pass the test. Therefore, all users preparing to install six types of systems must pay special attention to the construction quality of the contractor or contractor. The best choice is to use a construction team with six types of construction experience and evaluate the completed project.

5. Importance of certification testing:

The certification test of the six-category system is more important than the original five or more five categories. This is because the investment in the six categories of systems is large, so we need to strictly check our own investment to ensure the quality of investment. In addition, the current network application based on cat6 twisted pair has not yet reached the practical stage. That is to say, the currently installed cat6 system cannot use the actual network to check whether it can support high-speed networks, for example, 1000Base-T and 1000Base-Tx. Therefore, certification testing is the only best way to ensure that high-speed network applications are supported in the future. The relationship between networks and media and future development will be introduced in the future.

6. Construction Quality is a key factor:

When talking about cabling, people often pay attention to factors such as products and standards, and do not pay enough attention to construction issues. However, Mr. Ye Zhiqi, deputy director of the Communication Committee of China Engineering Construction Standardization Association, pointed out: "The construction is not good, and no good lines are available. Therefore, training should be completed before construction. Otherwise, the line is damaged, and the cat6 line is used ."

The company has always adhered to scientific and technological innovation and pursued excellence. Relying on its strong technical strength, the company is at the forefront of the industry. As early as 05 years ago, it proposed six standards and formed a complete series of products including: 1-250 MHz (General Class 6 standard), 1-550 MHz (super class 6 e standard), 1-600 MHz (super class 6 10g standard ). It is widely used in 10Base-T4, 100Base-TX, 100Base-VG-ANYLA, 155 MbpsATM, 622 MbpsATM 1000Base-T, and 10GBase-T.

6 common types of standards in the United States-250 MHZ

☆Test bandwidth: 250 MHz.

☆Ensure that ELFEXT and PSELFEXT have a 1 dB margin when the bandwidth range is 1-250 MHz.

☆Ensure that the values of NEXT and PSNEXT have a 3 dB margin during the full range of 1-250 MHz bandwidth.

☆Ensure that the ACR and PSACR values have a 3 dB margin during the full range of 1-250 MHz bandwidth.

☆Ensure that NEXT is 100 dB at 47.3 MHz and dB at MHz.

☆Ensure that ACR is 100 dB at 27.5 MHz and 8.5dB at MHz.

☆Ensure that the ACR value is greater than 0 at 300 MHz, and the working bandwidth of MHz can be provided.

Relying on advanced technologies, advanced concepts, good distribution networks, global technical training, excellent after-sales services, and the thirty-year warranty service promised by IDA, is your preferred choice for cabling products.