Q & A about vista wireless route settings

The following is a question and answer about vista wireless route settings. I hope to help you. Download the latest version 17 MB at the address below, which comes with instructions. Be sure to carefully read the document "Document of the function of wireless identification of ruijie certification client.

To address the problem of vista wireless route settings in use, first go to the resource manager to confirm, the system services "Wlansvc" and "EapHost" have been enabled. If they are not enabled, enter "services. msc "to find the Wlan Auto Config and Extensible Authentication Protocol services and start them.

There is also the problem of vista wireless route settings for routing (AP). If an AP is used, if there is only a wireless route, it will all be inserted into the LAN port and the route will be used as a wireless access point, if only the XP system uses ruijie for encryption, you can select two encryption methods: WEP and WPA1/2-PSK. However, WPA1/2 requires Raduis. Therefore, you cannot select WEP and WPA1/2-PSK..

In the vista wireless route configuration manual, version 3.63 only supports WPA1/2 Enterprise. In fact, the WPA1/2 method is the so-called WPA1/2 Personal mode, which is the PSK mode (Personal Share Key ), however, when I tried it, I found that If WEP is used for encryption, we could not authenticate redis on VISTA. So if there is a VISTA host, do not set encryption. If it is used for theft, we should "advertise the SSID name" if this hook is missing, you can create a new connection and enter the name of the SSID. Then, select "no notification is received but the connection is still ".

Another problem is that the wireless network cannot be found according to the instructions in the vista wireless route settings. Therefore, connect to the device first, enable ruijie, set the DHCP entry to authentication, and then select the wireless network card. Then, log on to the device, however, sometimes there may be situations such as "unable to find the authentication server" or "unable to authenticate.

Because the previous machine is added to the 192.168.1.100 authentication and then becomes a global address (for example, 10.11.22.33) however, when the machine connected to the AP is assigned 192.168.1.100, the authentication fails. ruijie does not know what the problem is. The DHCP address is always changed to 169 when there is a problem. 254. *. * It doesn't matter if I turn off DHCP and manually allocate the IP address.

In the past, the Administrator's so-called vista wireless route setting device could not penetrate EAP packets. As long as not particularly old APS can transmit EAP, the WEP age supports 802.1X and EAP. What's more, the current AP all support the WPA2 encryption method, so you don't need to find the device. I heard that version 3.63 is the first to support wireless ruijie.