Replace the record of the new hard drive on the HP server

HP a record of replacing a new hard disk on the server

I contacted three kinds of servers,Dell ,IBM,hp, each time the hard drive is not recognized disk, I do not know where to start, for this record.

1. first, the newly swapped disk needs to be formatted to be recognized or raid . of Course the newly bought server is needed to do raid .

Below are the specific steps to see below:

1. on the newly swapped disk, boot press F8 to enter the RAID interface as follows:

1. You can view the status of the disk in terms of its literal meaning, such as view logic drive to see the status of the disk.

(the previous bad disk should be deleted in the "Delete logical Drive" or the system will always get an error.) )

1. For example, to create a new logical disk, do a raid:

4. complete the above content, you can restart the server without any other operation, you will be able to identify the disk.

This article from the "11015159" blog, reproduced please contact the author!

Replace the record of the new hard drive on the HP server