Ruijie Certification: static authentication and dhcp authentication in linux

Ruijie Certification: static and dhcp authentication in linux-general Linux technology-Linux technology and application information. For more information, see the following. (1) perform authentication in a static IP environment
[Root @ hostname path] # xrgsu-


(2) perform authentication using DHCP Dynamic IP
Two authentication requests required

First run:
[Root @ hostname path] # after the authentication is complete, the xrgsu-d software will call the ifup command to obtain the IP address. If your device uses other commands to obtain the IP address, add the corresponding command to the parameter, for example, [root @ hostname path] # xrgsu-d ifup eth0

Then run
[Root @ hostname path] # xrgsu-a completes the authentication operation.

(3) Description of authentication options
A. please input your user name:
Enter the authentication username for the software request
B.
Please input your password:
Enter the authentication password for the software request
C.
Use DHCP, 1-Use, 0-UnUse (Default: 0 ):
If the operating system uses DHCP to obtain the Dynamic Address, select 1. Otherwise, select 0.
D. Use default auth parameter, 0-Use 1-UnUse (Default: 0): 1
Whether to use the default parameter for authentication. If you select 0, the default parameter will be used for authentication.
E.
Please input Eap-start Timeout (Default: 30 s): 30

Enter the timeout time of the Eap-start message, in seconds.
F. please input Eap-response Timeout (Default: 30 s): 30
Enter the timeout time of the Eap-Response message, in seconds
G.
Please input Eap-packet resend Time (Default: 3): 3
Enter the number of retransmission packets
H.
Use Red-Giant private MAC? 1-Use, 0-UnUse (Default: 1): 1

Whether to use the private multicast address of starnet ruijie for authentication. If you select 0, the software uses the 802.1x Standard multicast address for authentication.

Note: the path in the Command example indicates the installation path of xrgsu.

The software must run under the root permission.