Soltrace Tutorials (3) Basic methods

Source: Internet
Author: User

In Soltrace, the optical system is now on the stage of the world coordinate system. This stage is not strictly defined as part of the optical geometry, where once light is exited on the stage, the path of other rays in the system will not be re-entered. A complete system geometry may consist of one or more stages. This is where the user's area of responsibility defines the corresponding stage geometry. The goal behind the stage concept is to use effective tracking to save processing time and allow the use of modules to represent the system. Another important advantage of the stage is that they can save and use other system geometry without recalculating the position and orientation of the element. Splitting through the geometry of the stage can be useful in assigning different coordinate systems to a particular geometry, and it can be easier to adjust the position.

A stage is made up of elements. Each element consists of a surface, an optical interaction type, an aperture shape, and, if appropriate, a set of optical properties. The position and orientation of the stage are defined in the world coordinate system, and the position and direction of the elements in the world coordinate system of a particular stage are defined as special. The stage can be of two kinds: optical or virtual. The optical stage is defined as the physical interaction of a ray (anoptical stage is definedas one, the physically interacts with the Rays). Instead, a virtual stage is defined as a ray that does not need to interact physically (a virtual stage is defined as one of thedoes not physically interactwith the Rays). The virtual stage is very useful in determining the light in the position and direction, and in different locations along the path of light that is unaffected by the physical ray trajectory and the incident power or flux. Therefore, the elements defined on the virtual stage do not have optical properties because they have no light interaction. The optical stage consists of elements that may change the ray trajectory due to interaction. These elements have the optical properties and interaction types associated with them. In addition, the optical and virtual stages are the same in terms of definition and use. The stage can be copied and moved as a set of elements, and saved using other geometry systems. Currently, it is still not possible to mix virtual and optical elements on a single stage.

Soltrace uses three right-handed coordinate systems: World coordinate system, stage coordinate system, element coordinate system. These coordinate systems are shown in Figure 1. Each element in the stage has a local coordinate system (such as position and orientation). Each stage defines a coordinate system that is relative to the world coordinate system. As shall be described later, the direction of the sun is related to the world coordinate system. Currently, the sun is oriented in the form of vector input, or using Time-of-day, Day-of-year, and the specified latitude format. Light is generated from the sun and is traced through each stage in the geometric structure. The position and direction of each ray in each stage is stored in memory for later calculation and output.

Figure 1 Generalized version of the Soltrace coordinate system

NREL High Flux Solar Furnace shows an example of a complex multi-stage multi-element system in Figure 2. Note the world coordinate system (black), the stage coordinate system (red), and the element coordinate system (blue). In this example, a total of three coordinate systems are noted for the world coordinate system at the center of the second stage. This arrangement is due to the system's main condenser on the second stage. The first stage consists of a planar reflective element (a daylight reflector). In this case, the stage coordinate system is a daylight reflector, the center of rotation and the element coordinate system are slightly offset by the stage coordinate system because of the physical distance from the drive mirror surface (thestage coordinate system is the center of rotation of the H Eliostat and the element coordinate system lies slightly offset from the stage coordinate system to account for the Physic Al distance of the mirror surfacefrom the drive). The target point of this stage is to set a default sun height and azimuth angle according to the specified latitude, day of the Year and hour. The second stage consists mainly of 25 hexagonal reflective elements, each with a spherical curvature. This stage is above the world coordinate system. The coordinate system of one of the 25 independent components is in the upper-right corner of the stage coordinate system. Each of the 25 components is labeled so that the central reflection ray can affect the same position in the third stage. The third stage and the final stage are a simple stage (rectangular plane target) located in the experimental Bay of the HFSF building (thethird and final stage is the sample stage (a rectangular flat target) located In the experiment Bay of the HFSF building). Again, the element coordinate system occupies the same position and direction as the stage coordinate system and marks it back in the middle of the main concentrator. The details of the element/stage are defined later.

Figure 2 shows the stage coordinate system applied on the high Flux Solar Furnace geometry

The world coordinate system and the stage coordinate system are transformed into the stage coordinate system and the element coordinate system respectively, and are rotated by three Euler angles. These rotations are shown in Figure 3.

Figure 3

The first rotation is rotated by the angle α around the y-axis, the second wheel rotates by β around the new x-axis, and the final rotation is rotated by the angle gamma around the new z-axis. After the parent coordinate system is converted to a sub-coordinate system, three rotations completely specify the direction of the sub-coordinate system. The first two rotations are determined automatically by a specific point in the parent coordinate system, which is aligned to the z-axis of the sub-coordinate system. The last rotation of the sub-coordinate system is determined. The first two rotations are based on the definition of coordinates, and the last rotation is through the user input parameters. In addition to the point definition and Z axis rotation, all coordinate system rotation calculations are handled by Soltrace.

Soltrace Tutorials (3) Basic methods

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.