Solution to the blue screen after the win10 system is upgraded

Solution to the blue screen after the win10 system is upgraded

Recently, some netizens failed to enable the blue screen on the computer after upgrading the win10 system. What is the problem? Don't worry. The following small series will introduce you to the specific repair methods. If you need them, let's take a look.

Software repair

1. Press F8 immediately when starting the system and wait until the advanced option appears. Then press "correct configuration last time" and press enter to fix the problem.

2. If you cannot press F8 to enter safe mode, restore the system or reinstall the system.

3. After Reinstallation, the screen is still blue. It is recommended that you repair the screen. If you can enter the security mode, it indicates that you have installed the inappropriate things and uninstalled all the inappropriate things downloaded before the accident, or restore or reinstall the system.

Hardware repair

1. This problem is caused by software conflicts, inappropriate drivers, and system problems. You can restore the system in safe mode or reinstall the operating system, do not install software, patches, drivers, etc. Are there any problems when starting the system? If the driver, patch, and software are not installed in a step-by-step manner, find out the inappropriate things and do not install them.

2. If it is caused by hardware, deduct the battery on the motherboard and unplug the memory and clear the graphics card. check whether there is a problem with the hard disk. If not, repair the hard disk.

3. deduct the battery of the motherboard and put the power off. In addition, the disk is damaged. If you cannot solve the problem, go to the repair service to help you.

The above is the solution for failures to enable the blue screen after the win10 system is upgraded. If you need it, refer to this solution.