Solutions for surfing the internet with mobile phones and laptops

Online excerpt:

Data lines are required, mobile phone support is required, and mobile phone operator support is required! Connect your phone to your computer using a data cable and use your phone as your modeo. use wireless signals to connect your phone to your computer!

Bytes ------------------------------------------------------------------------------------------------------------------------

<Post> $20 monthly subscription cmwap final strategy (WWW on mobile phone)

I declare that this setting is designed for users who have been blocked or who intend to stop using cmnet. I will talk about it in combination with the topic in this article. Currently, many settings only use the WAP Gateway.
Www. It is very troublesome to set up a data connection for both the WAP and the lottery messages, and it is a duplicate proxy, which is very slow, this is because I do not understand the basic concepts of proxy and GPRS connection.
. I dare not say it is the best, but it should be reasonable. Please make a picture.

I. Mobile Internet access settings are as follows:

Enter settings/Data Connection/menu/edit connection, and delete all the items in: 1 dial-up connection, 2 VPN connection, 3 proxy server connection, and 4 GPRS connection! In this way, you don't have to worry about accessing cmnet. It doesn't matter if you don't delete it. Just change the name of the Access Point to cmnet. You can change it back when it comes to cmnet in the future.

Then go to 3 proxy server connection and click menu/1 to add:

Description: www.

Connection: WAP network

Connect to: Internet

Proxy Server: 10.0.0.172: 80

Type: HTTP

Complete.

(Also note: this is the proxy used for WWW)

Add again:

Description: WAP

Connection: WAP network

Connect to: Secure WAP network

Proxy Server: 10.0.0.172: 9201

Type: WAP

Complete.

Then press finish.

(Also note: this is used to directly access WAP, and the direct access to WAP is in the monthly subscription. Do not act as a proxy)

Follow in Step 4 GPRS connection, click menu/Add:

Description: ok527

Connect to: WAP network

Access Point: cmwap

Complete.

Then press finish.

Now, go back to the data connection main menu and click menu/option:

Connect my desktop to: Secure WAP network

Complete.

Go to the data connection main menu, select ok527 for "secure WAP connection", "WAP connection", and "Internet", and click Finish.

Add the MMS/option and select "WAP network" as the connection settings. Press finish.

Then enter IE browser/menu/option/connection:

Remove the "Automatic Detection Settings" check box;

Select Network: Internet

Complete.

The reason is that "Internet connection" and "secure WAP connection" both have proxies, and the MMS software has already configured proxies, so only the "WAP network" is not proxies, therefore, select "WAP network" for the connection settings set in the MMS center ".

In this case, no matter whether sending MMS or accessing the internet or WAP, the GPRS connection they use is ok527, so there will be no switching problem.

Click a webpage starting with WWW, and then click a page starting with WAP to see if the Internet can be opened?

If you use ucweb, javaqq, and ucmail, you can select the WAP network for network settings in Java. The HTTP proxy can be selected quickly. If you want to select an HTTP proxy, this way, you have another layer of proxy, and now many of them are set up like this. You can try it.

2. Mobile phone when a cat uses a computer to access the Internet:
1. First download the software China Mobile Communications with the ebank client (Must download) http://www.monternet.com/download/setupV2.0.2.rar
Install the SDK after the download!
2. First, choose "attachment"> "Modem connection"> connect "U"> menu> activate, and double-click the ActiveSync icon, to the file -- connection settings -- allow u to cancel connection establishment.
Then connect the data cable and put the 8390-equipped Microsoft disc into the optical drive (or your mobile phone modem driver). Then, the system detects "modem ". Install the driver.
3. Start the China Mobile Communications Client!
Tool ------ connection settings ------- GPRS ------- settings ------ In the GPRS settings set APN: cmwap Dialing: * 99 # the user name and password are empty, Save settings. Start the manual connection to GPRS ---- select Min digiwalker smartphone U moden in it, and then connect. You can see that the software is dialing GPRS and finally seeing the data packet being transmitted! Then the computer will prompt the prompt that the system has been connected to China Mobile Communications.
4. Open IE, set Internet Options-connection-Internet access-settings-Proxy Server-address to 10.0.0.172, and enter port 80 to confirm. (If you open a webpage, a download or blank box is displayed)

5. if you want to connect to QQ, go to QQ system settings-proxy settings-use custom network-HTTP Proxy-server fill in 10.0.0.172-port 80-test, and click OK.

6. Now, although you can access QQ, but you may not be able to access the Internet, open notepad and write the following code: (the most critical part)

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE/software/Microsoft/Windows/CurrentVersion/Internet Settings/5.0/User Agent]

@ = "Openwave"

[HKEY_LOCAL_MACHINE/software/Microsoft/Windows/CurrentVersion/Internet Settings/5.0/user agent/post platform]

". Net CLR 1.1.4322" = ""

"Openwave" = ""

Save as Reg format (please note). This step is important! Next, double-click the file, write it to the registry, and restart the computer.
7. Re-use casual dialing and enable ie. Although the Internet access speed is not comparable to that of ADSL, it is twice faster than that of a 56 K kitten, wireless Internet access can only be like this. If you have another book, it will be messy everywhere at any time. In addition, the cmwap Access Point viewing method introduced by the author is really a great tool for bubble mm.

Bytes -----------------------------------------------------------------------------------

Using a mobile phone to connect to the computer to access the Internet, I believe that for China Mobile, only global users can enjoy this service, and for mobile terminal cards that support 20 RMB GPRS monthly subscription, If you can use mobile terminal cards to access the Internet, I believe it is more favorable, so I finally found this method for everyone. 1. Choose "Settings"> "Data Connection"> "GPRS"> "GPRS connection" and select "when necessary ". 2. Choose "Settings"> "Data Connection"> "GPRS"> "GPRS modem settings"> "Modify Access Point"> "GPRS access point", and enter "cmwap ". Part 2 data cable and infrared The data line has two kinds of DKU-5 and DKU-2, first install the DKU-5 driver, the original driver inside there are two drivers, one is to the comport driver, there is a is the data line driver, both must be installed! Restart after the driver is installed! Finally, install the PC kit. The higher the version, the better! Part 3 computer First, open "Control Panel" (if it is a data cable), double-click "telephone and modem options", click the "modem" tab in the pop-up box, and click "add ", install the phone modem, and then in the pop-up box, "do not detect my modem; I will select from the list." In the previous check box, click Next, select Nokia in the manufacturer box, and select your mobile phone model (Cable refers to the cat of the data cable, IrDA refers to the cat of the infrared, do not select the wrong port.) Click Next and on the "port on which to install? ", Select "the port where the data line is located" (you can see the port number in the Device Manager), click next, and then press "continue" in the displayed verification box ", finally, press "finish ". Click "OK" to exit! Second, if it is infrared, open the infrared interface of the mobile phone and align it with the infrared adapter. The computer will automatically install the driver of the mobile phone cat. The standard infrared modem is installed in the XP system, there is also an infrared cat of your mobile phone model under 2000, that is, what is 3220 IrDA and so on, two cats can be used, it is best to choose your mobile phone cat driver during dial-up connection, do not select a standard infrared modem. Third, open "Control Panel", double-click "Nokia modem settings", fill in "cmwap" in the "GPRS Access Point" box, and click "OK" to exit! If your card supports cmnet access, no protection is provided if you have enough money. If this parameter is not set, cmwap must be set for the GPRS Access Point of the mobile phone. If neither of them is set, the mobile phone will display "No GPRS request applied" When dialing. If both are set, when dialing, it depends on the Access Point entered on the computer. Fourth, optimize the mobile phone and cat. Click Control Panel-telephone and modem-select your mobile phone cat-properties-maximum port speed: 230400 (if there is a problem with the dial-up prompt that the cat cannot be found, change to 115200 ). Part 4 establish a dial-up connection First: Control Panel-Internet-connection-create new connection-manually create my connection-connect to the modem through a telephone line-select your installed mobile phone cat-dial number: * 99 #, * 99 *** 2 #, or * 99 *** 3 #. One of them is (may vary across regions) and the dialing rules are not used! -Do not enter either the user name or password-create a name for this dial-up connection. Second, choose control panel-Internet-connection-select the connection you just created-settings-HOOK: use proxy server, address: 10.0.0.172, Port: 80-click the dialing setting property-select the cat you used when dialing, the default has been selected-configuration-maximum speed select 23400 (data line), 921600 (infrared ). If you cannot find the cat or the unstable old line is lost when using the data line dialing prompt, change 23400 to 115200; do not change the infrared line! Click OK to exit! In the "network" option, select only the Internet Protocol (TCP/IP), and do not select any other option, which can speed up the connection. Finally, confirm to exit. Third, the control panel-Internet-advanced-hook uses http1.1 through proxy connection-and then goes to the multimedia column to remove images, animations, and videos from the hook, (this will accelerate the speed of Web Page browsing, which is more useful than the mobile accelerator). Of course, you can choose all the pictures you want, but the speed of opening the web page will be very slow.

 

Bytes ----------------------------------------------------------------------------------------

Normally, now mobile has disabled the cmwap proxy. If you want to browse the WWW web page, you must activate cmnet. For details about how to activate cmnet, contact the local site at 1860. ------------------------------------------------------------------ You set up a proxy in your browser
10.0.0.172, port 80, can be equipped with a license:
A mobile phone, a data cable, and a laptop (of course, a desktop computer also works)

Cost:
This solution is more cost-effective than the GPRS network card + laptop wireless Internet access launched by mobile companies. Mobile companies require you to purchase a GPRS network card (generally around 1500 RMB, and you cannot use the monthly subscription method to access the Internet. You can only offer a discount on the amount of MB of traffic)
The cost of this solution is a data cable (generally 50-60 ￥) and a mobile phone (usually the investment cost ), A monthly Unlimited Traffic SIM card (any SIM card in this package in Zhejiang can handle the gprs wap unlimited 20-member monthly package. If you have a mobile phone, you don't need to buy it. You just need to go to the mobile company to handle it .) The actual cost is enough to invest in a data cable.

The mobile phone data line is a better and most stable connection method, which can be subdivided into the COM connection line and the USB connection line. If you are using a laptop, we recommend that you use the USB interface. USB supports hot plugging, which is very convenient to use. The computer connection lines of various mobile phones are different (the mobile phone must support GPRS internet access, that is, the built-in GPRS modem is required). For example, the Motorola mobile phone must use the corresponding data cable of the mobile phone and use the USB data cable, the USB data cable driver must be installed on the computer. The USB data cable we provide is provided with complimentary and attached USB data cable drivers and applications.

The following process is generally required:

First, after the data cable is connected to the USB port of the computer, a new hardware prompt will appear on the computer (Windows XP is recommended, which will simplify the installation process ), insert the optical disc attached to the data cable into the optical drive so that the system can automatically find the driver. (for example, to install the driver file in the data cable drive disc, install the driver file first ), generally, the system will be able to find the driver after a period of time and prompt you to install it until the installation is complete. If the message "the new hardware has been installed successfully, you can use it now" is displayed and a virtual USB port number is displayed in "Hardware manager"-"Port", indicating that the hardware has been installed successfully, you can perform the following general operations.

Second, after the hardware is successfully installed, a GPRS modem is installed (this may have already been installed when the driver is installed, different mobile phone GPRS Modem installation may be different), in the "Hardware manager"-"modem" if you do not see the corresponding GPRS modem of the mobile phone, manual installation is required (you may need to install the driver of the GPRS modem before installing the GPRS Modem). For details about the installation method, see the data cable or mobile phone instructions.

3. After the GPRS modem is successfully installed, you have already finished it. Next you need to create a dialing link in your computer (this process can be completed step by step in the system wizard ), enter "Dialing: * 99 #. the user name and password are empty ".

Fourth: Set the dial-up connection method. If this step is not used, you will not be able to afford the cost (0.1/kb, 100 Yuan does not have much traffic to consume ), find the GPRS modem of the mobile phone in "Hardware manager"-"modem", in the "property"-"advanced" of the GPRS Modem, enter [at + cgdcont = 1, "ip", "cmwap] (Note: The command in parentheses) in the additional initialization command" to confirm.

Fifth: If the steps above are OK, you can dial now. Try it and you should.

Sixth: When the dial is successful, the system prompts that the connection speed is 115 kbps. On the surface, the dial-up connection is successful, but the actual speed is about 64 Kbps without 115kbps. If you cannot access the WWW website on IE, you need to set up a proxy as follows:
In ie "Internet Options"-"connection", find the dial-up connection you created, click "set", and set "Address: 10.0.0.172" in "Proxy Server: 80. Click OK.

7: Now try to use IE to open the WWW website. You should be able to open the webpage.

All success is done as ^_^.

After the wireless dial-up is successful, You need to log on to QQ and enter the address 10.0.0.172 port: 80

If you have any questions, please contact me via QQ: 190824772
References: Workshop. If it is correct, the phone will be recognized as a modem. Then, follow the method of using a cat to access the Internet. The number seems to be #99 #. You 'd better ask at service center 1860 at your own expense.