Teach you how to broadcast live on the Internet

Teach you how to broadcast live on the Internet

RealSystem producer. This software is mainly used to create streaming media (Stream). v8.51 is the latest version. There is nothing special about the installation, and the registration code is required. : "(I used the plus English version, and the Chinese version is available online). After the installation is complete, I will see the green icon:

This software has multiple functions. This article only describes how to set up a network station. The steps are as follows:
1. Double-click the icon to start the realproducer software. The new session window is displayed. Select "livebroadcast" and press OK.

2. Because the broadcast is to be recorded, that is, as long as the sound is specified, "capture audio" has been selected in the pre-options, and capture video is not required. Next step

3. You will be asked to enter some information about the radio station. Enter the next step.

4. In the next window, select the types of network transmission rates required for the media stream file you have created, including single-rate and multi-rate) two types: single-rate for Web servers.

5. Select the target audience rate. Only one rate can be selected. There is no limit on the multiple rates. I chose the playback performance of the 28 K modem.

* Note: the reason for the selection in steps 4 and 5 is laterArticleThen perform a detailed analysis.
6. In the audio format setting section, that is, when you set the playing effect for online broadcast, we can use the high-quality option "stereo music ".

7. The media server interface appears. In The Real Server Settings section, enter the "current RealServer" on the RealServer management interface, that is, the local ID. (If the RealServer and realproducer are not working on the same machine, you need to fill in the Host IP address or domain name 300.7sn.com. For details, refer to the specific analysis later.) in the server port section, you still use the default 4040 file name (filename). The author uses ting81.rm, in the username and password sections, enter the ones set in RealServer, which are 7sn and 7sn. There is an "ARCHIVE broadcast to file" option at the bottom to check the file path under the broadcast sound recording you want to play. This path can be selected by your choice, but don't forget where it is. After installation, your broadcast listening address is
RTSP: // 300.7sn.com: 555/ting81.rm

8. The last step is to browse your previous settings again. If there is no problem, press "finish ".

9. Then we will return to the realproducer screen. At this time, we can press "start" to play the first MP3 player with any player, we can see that "audiolevel" is displayed with green and red ups and downs.

Note: Generally, the default setting of the sound card is to specify "select microphone" in the recording item of the volume control. Therefore, no volume bar is displayed when realproducer is run for the first time. Right-click the speaker icon in the lower right corner of the screen, select "turn on volume control ". (You can go to the "options" menu "audiocapture Settings" "volume control" of realproducer.) For example:

Click the menu above: options -- properties, select the recording, select "stereo mixer (Stereo mixer)" under the hook, OK

Next, select "select" under "stereo mixer" in the recording control window ". In this way, the volume bar in realproducer is beating.

* Note: there are still many things to pay attention to when you adjust the volume, which will be analyzed in future articles.

10. As for NJ, you only need to cancel the mute hook on the volume control page.

Iv. Check whether network broadcast is successful

How can I test whether RealServer and realproducer are working properly? We can use RealPlayer to play the video again. Enter rtsp: // your server address/encoder/live at the location of open or in the browser address bar. rm.
For example, RTSP: // 300.7sn.com: 555/ting81.rm. in the lower part of the window, you will see the word "Buffering", and then "live" appears on the right) "And time keep beating, which means you're done.

If you want to stop playing, press "stop" to display the "broadcast complete" window, which records the start time and end time of the previous playback, there is a "View statistics" option in the lower-left corner. After entering, you can see more detailed information.

 

How do I know how many listeners are listening to your special program after learning to play live? You can double-click the RealServer 8.0 administrator icon and click "Monitor" on the left, you can see how many people are connected to your server to listen to your program.
A user is connected,

His IP address is:

If you have completed the preceding * operations, you can immediately set your broadcast address.
RTSP: // 300.7sn.com: 555/ting81.rm send it to your friends and let them hear your program !!!!

**************************************** **************************************** *****

Dreamweaver can only serve as a webpage for content related to radio stations
You can use Winamp to set live broadcasting stations.

Use Winamp to set up your own radio station --

1. Prepare Winamp software and radio plug-ins.Program, Server program. Winamp must be in version 2.5 or later. The other two names are listed below:

Shoutcast-1-9-2-windows.exe

Shoutcast-dsp-1-8-2b-windows.exe

It's not big, and the sum of the two is 476 K.

2. Install software

Shoutcast-dsp-1-8-2b.exe is the DSP plug-in for Winamp radio playback. Install it in Plug-in under Winamp's installation directory.

Shoutcast-1-9-2-windows.exe is the network server of the Network Station. Install it at will.

3. Settings

Install two things, run Winamp, press Ctrl-P, open DSP-effect under plug-ins, select

Nullsoft SHOUTcast source DSP. A Setting dialog box is displayed.

3.1 switch to the output page. This page mainly sets two things. One is the port of your station (8000 by default). Remember the password entered here. Press the yellowpages button to enter the description of your radio station and submit it to shoutcast.com for publishing as needed. Here, you only need to set a description, which is the name prompted when someone else connects to the system.

3.2 switch to the encoder page. This page sets the encoder sound quality information and determines the sound quality of the station based on your bandwidth and the number of connections you are about to provide. The default value is 24 kbps, 22.050 kHz, mono.

3.3 now you can set the server side, execute ShoutCast DNAs (GUI), and select Edit configuration from the menu. Open a configuration file in notepad, find Password =, and enter the password of your Nullsoft SHOUTcast source DSP. If you have changed the port number, you need to change the port number of portbase =, by the way, I almost forgot to find the maxuser line. This setting sets the maximum number of users. This is based on your bandwidth settings. Save and exit. Restart the server.

All right, go back to Winamp, enter the DSP settings, click the output page, and click Connect to connect to the server. You can use Winamp to play MP3. Normally, data is sent to the Service port.

Now, this station can be released. When listening, you need to tell others your IP address and port number, let the other party press Ctrl-L in Winamp to enter IP: port number,

4. radio station management: Open the radio station address in a browser. For local management, enter http: // localhost: port number, such as http: // localhost: 8000. Click admin, login, you can log on to the management interface.

 

 

Shoutcast-dsp-1-8-2b is:

URL http://www.shoutcast.com/downloads/shoutcast-dsp-1-8-2b-windows.exe

ShoutCast:

Http://www.shoutcast.com/downloads/sc1-9-2/shoutcast-1-9-2-windows.exe

If the above address cannot be used for ShoutCast, you can also

Http://www.onlinedown.net/shoutcast.htm