The solution to the computer's optical drive not being able to bounce

Not long ago, the company a server and song CD-ROM failure, began to be good, the CD-ROM after the copy of the data in the CD, unexpectedly in the push disk when the CD-ROM is not out, after the helpless can only restart the computer, but the problem is still, the final choice is to use the needle force push the disc to bounce out. Optical drive does not come out is a more common computer failure, the general may be the problem of the CD-ROM itself, or internal shrapnel problems, some may be small problems, the next editor will introduce you to the next optical drive can not come out of the solution.

What to do if the optical drive does not bounce out the solution of the computer optical drive

The optical drive does not bounce first try to restart the computer to try, because sometimes the computer internal program error caused by the CD-ROM, but in accordance with the frequent restart effect is not small, generally speaking, the computer in the use of a long period of time, will appear some of the hardware began to aging, often will encounter the situation of the computer CD-ROM, Click on the CD-ROM drive button, see the CD-ROM light flash Two, can only hear the squeak, but the tray is not bounce out, if you press a few times the disc rack occasionally can pop up, but always good and bad, such a situation we need to pay attention to. Let's take a look at the solution of the optical drive can not come out! Computer Fault repair Daquan computer failure not to ask the novice computer maintenance knowledge

To solve the CD-ROM drive does not come out first must understand the reason why the optical drive does not come out, summarized here as follows:

Situation one: optical drive out of position button failure

When the CD-ROM drive panel on the exit key, the optical drive does not bounce out, but in "My Computer" right-click the drive letter Select "Eject" after the CD-ROM drive can be out of position, which indicates that the key out of the CD-ROM drive panel failure, the solution can try to remove the optical drive, the key to check whether there is can also ignore, anyway, in the computer can also operate the eject CD-ROM.

Scenario Two: Optical drive exit mechanical system gear wear

Optical drive out of the mechanical system gear wear, this situation often in the press of the exit key, you can hear the CD-ROM drive out when the "click Stops" sound, but the optical drive does not bounce out, this fault is due to the optical drive out of gear wear caused, because most of the computer optical drive in and out of the silo gear is made of plastic, Long-time action and the plastic itself aging make the gear premature wear, gear and gear between the intermittent too large will slip, resulting in the optical drive does not come out of the fault; The solution is recommended to repair, of course, if used for a long time recommended to change the new, after all, the optical drive is now cheap.

Scenario Three: optical drive itself mechanical failure

If the optical drive is not recognized in the computer, or the key and the above operation without any reaction, first check the line connection whether there is a problem, especially the power supply section, if no problem, then the problem is the CD-ROM drive itself, for mechanical failure, if the repair can also try their own repair (mobile hard disk does not show how to do), A good suggestion for a new economy.

The solution to the optical drive cannot be played out:

We can according to the reasons described above to determine what kind of problem, and then the corresponding to try to solve, but for the novice friend can not be ignored, the optical drive also has an emergency pop-up function, many times can be temporarily used under, also does not affect the use of optical drive.

The optical drive does not bounce-don't forget to use the optical drive emergency eject hole

As we all know, the optical drive panel is designed for emergency exit hole, once the optical drive failure can not be returned to the position, you can use a paper clip or toothpick and other hard objects inserted emergency out of the Cangkong (need to force), the CD-ROM tray will pop up a small part, and then pull out the tray by hand; Many netizens reflect that their optical drive did not find the emergency out of the small hole, in fact, the chassis will need to be the small optical disk drive down to see the real optical drive panel, the real optical drive panel should have a brand logo, this can be first to remove the CD-ROM disc first removed and then the operation more convenient.

Edit summary: In fact, the optical drive does not come out much is due to the mechanical structure aging, so through the optical drive emergency out of the Cangkonlai forced out of the position is not a cure, if the computer optical disk drive reading ability, reading speed are also very strong, you can consider the CD-ROM drive professional repair points for wear gear replacement, If the optical drive read disk performance has been very poor and use for many years, you should consider replacing the new CD-ROM, the above is the computer Pepsi network for everyone to summarize the reasons for the CD-ROM and the solution, I hope to encounter this type of optical drive failure friend for reference.