Tp-link tl-wdr6300 routers How to set

Tp-link tl-wdr6300 Router set wireless name and password Tutorial Step one: Set up a wireless working band

Log on to the TL-WDR6300 router's setup interface, and then click on "Wireless band settings"--> select "Wireless simultaneously working on the 2.4GHz and 5GHz band (802.11A/B/G/N/AC)"--> "Save".

Tp-link tl-wdr6300 Router set wireless name and password Tutorial Step two: 2.4GHZ wireless network name and password settings

1, 2.4GHZ wireless network Name settings: Click the "Wireless Settings 2.4GHz"--> "Basic Settings" will appear the following settings interface. Set the SSID number, the SSID is the name of the wireless network--> click "Save".

2, 2.4GHZ wireless network Password settings: Click on "Wireless Settings 2.4GHz"--> "Wireless security settings." Select "Wpa-psk/wpa2-psk"--> set "PSK password", PSK password is the password of the wireless network--> click "Save".

Tp-link tl-wdr6300 Router set wireless name and password Tutorial step three: 5GHZ wireless network name and password settings

1, 5GHZ wireless network Name settings: Click on "Wireless Settings 5GHz"--> "Basic Settings", the right appears below the interface shown below. Set "SSID", the SSID is the name of the wireless network, it is recommended to use a combination of letters and numbers.

2, 5GHZ wireless network Password settings: Click on "Wireless Settings 5GHz"--> "Wireless security settings." Select "Wpa-psk/wpa2-psk"--> set "PSK password", PSK password is the wireless network password, password length can not be less than 8 bits--> click "Save".

Tp-link tl-wdr6300 Router set wireless name and password Tutorial Step four: Restart the tl-wdr6300 router

1, in the previous step of the page will appear at the bottom of the message: "You have changed the wireless settings, restart after the effective", click the "Restart" button.

2, enter the restart router page. Click "Restart Router".