TP-LINK wireless route troubleshooting

Fault description:

When there are no vrouters, the number of indicators is still normal, and the two vrouters can ping each other. You can determine whether the region network is correct, remove the vro and use a router to directly connect to the Internet. You can also easily access the Internet. This shows that there is no problem with the ADSL Network. Therefore, the vro is the biggest suspicious object. You can find it clearly. After restoring the router's outgoing value, re-install it, and enter the Internet Explorer Address: 192.168.1.1. log on to the primary management plane of the router after the car is returned. In the case of network traffic data/WAN port configuration, select the WAN Interface Type: pppoe, after you reenter your website and password, click "refresh" and then press "refresh". However, the system still fails to refresh the screen. After checking the system's daily status, the system will send a response request. The system will use the domain name or password to initiate a response. However, the user should use the primary name and password to access the website normally, that is, there is no problem with using the primary name and password.

Fault analysis:

At present, some local hosts use the fixed network card MAC address method to prohibit the sharing of the Internet. This problem can be solved through the "MAC address clone" function, in the network topology data/MAC address clone, clone the MAC address of the previously managed PC to the vro. The configuration method is as follows:

 

1. Open the IE streamcompute and input 192 in "address overflow. 168. 1. 1. When you return to the vehicle, a caller will be prompted to access the login name and password. Admin is used for both the secret name and password.

2. Click "Confirm" and then enter the primary management interface of the router. The left-side menu bar of the router's main management interface is a series of management options.

 

3. Click "Number of Network Connections" --> "clone MAC address", and click "clone MAC address" on the displayed page"

4. Select "System Tools"> "reconnect Router" on the left to complete configuration.