U disk Installation windows8 Tutorial

U disk installation windows8 tutorial ready to install files: To prepare a mobile hard disk larger than 5GB or U disk (if the installation has no development tool version, 4GB or so enough), if it is a U disk, download windows7usb/ Dvddownloadtool work will be windows8dpiso into a bootable boot disk. If you are moving a hard drive, you need to set the following: (I choose this option) to ensure that there is a partition on the hard disk is large enough space, or separate a 5-10gb space out. Then in Windows System Management, the partition is set to active in Disk Management:

Computer knowledge

The ISO is then read with a virtual optical drive, copy all of the files in it to this partition (including hidden files) or we can prepare a DVD9 disk, burn (not recommended, not to buy at home, and not necessarily useful) or we can also through the network, local disk sharing, etc. Booting through a boot disk and then accessing the run Winload.exe I have not tested, not necessarily good try. Start Installation: First check whether your computer motherboard supports USB device boot, if it is, in the boot of the choice through the USB boot, you can successfully enter the WINDOWS8DP installation interface. (Note: If you do not enter the normal, such as his report HAL error, etc., it can only congratulate, your hardware is too avantgarde, he does not support.) When you get into the selection section, you need to press SHIFT+F10 to pull up the command line, OK this time we need to create the VHD (Virtualharddisk) and mount the VHD. Use the command line dir, etc. first in the existing partition to find a large enough partition, personal advice to find a 50GB free space above the partition, remember his letter, such as D disk, enter the DiskPart tool, command line input DiskPart. Using the command createvdiskfile= "D:WIN8.VHD" type=expandablemaximum=50000 create a maximum space under D: 50GB dynamically incremented VHD files (with fixed size type=fixed, of course). It is important to remind everyone that do not think that he is a dynamic increase in space, I can only have less than 50GB of the partition to create it, as such, although the general virtual machine can be read to guide the system or file in the VHD, but directly through the physical machine boot is not a good way, Because when booting starts, she creates a logical partition based on the settings of the VHD, so if you are less than 50GB, and he still wants to occupy 50GB of space, he will report a lack of space error. So keep in mind that you must choose a partition with enough space and then set a reasonable maximum value. Then select the VHD file and mount him:

In the selection of the installation partition of the interface click Refresh, find the partition you just mounted, confirm the size, select it, the next step begins the formal installation. The above create VHD step can also be done in Disk Management in your existing Win7, menu, action, create VHD:

Then, reboot and install successfully. After the WINDOWS8 is installed, he will generate his own bootmanager, and this bootmanager is supported directly in the VHD boot Win8, so you should be able to see the following interface:

See the above interface, select the system you want to enter. If you are familiar with Bcdedit, you can either modify the Bootmanager content yourself or use Windows7 bootmanager. The EASYBCD tool is recommended here, the visual interface is simple to operate, much more intuitive than the bcdedit of the command line. (suggest familiar classmate operation, otherwise it is very easy to get into the system) well, basically simple these steps, the entire installation process of about 20 minutes, and finally look at the landing after my screenshot:

Attached: I win8dp on the Office2010 now seems very stable, windows in the same vein to do is also authentic. But it is also true that Win8, the same nucleus as Win7, adds something. Mainly concerned with the development of his metrostyle.