Use ADSL to set up the Internet access for the tengda Router

We are very interested in the connection of Tenda routers through iron Tong ASDL. Before giving you a detailed description of how to set up the tengda router, let's first understand the basic content of ADSL and then compare the advantages and disadvantages of the following methods.

Use ADSL to set up the Internet access for the tengda Router

If you are using tietong ADSL and cannot access the Internet after the vro is installed, follow the instructions below to set up the computer and check the running status on the 192.168.0.1 page. For example, the WAN status connection status is wan ip xxx. xxx. xxx. the subnet mask is xxx. xxx. xxx. xxx is not 0.) If you are using tietong ADSL, The vro cannot access the Internet after installation. Set it as follows:

First, follow the instructions or CD instructions to set up the computer and check the running status on the 192.168.0.1 page. Tengda vro such:
◆ WAN status
◆ Connection status
◆ The wan ip xxx. xxx is not 0)
◆ The subnet mask xxx. xxx is not 0)
◆ The number of xxx. xxx in the gateway is not 0)
◆ The Domain Name Server xxx. xxx is not 0)
◆ The number of xxx. xxx in the backup Domain Name Server is not 0)
◆ Connection method PPPoE
◆ Connection time hour: minute: Second

It indicates that the tengda router has been connected to the internet through ADSL. If you still cannot open the web page you want to browse, check the following information:

◆ Set the local connection of the computer to automatically obtain the IP address/automatically obtain the DNS address. Click Start> Settings> control panel, find network connection, and double-click it. Right-click Local Connection> properties to go to the page, in the "use the following items for this connection" column, double-click internet protocol TCP/IP), select "automatically get IP Address" and "automatically get DNS address", and confirm the close dialog box.

◆ Set "internet properties" as follows: double-click the Internet assumerie browser), click "Tools"> "internet Options", click the "connection" tab, and select "Never dial-up connections ", click "application" in the lower right corner 〉. Click "LAN Settings". All three items are not selected. Are you sure you want to exit.

◆ Enter 192.168.0.1 (vro settings page), click "Advanced Settings" on the left, click "WAN Port Settings", and change MTU to 1450), and save the configuration. In this way, you can access the Internet. If you have any questions, restart your computer. The tengda router setting method can also be applied to most network Vanguard environments.