4, select the filter-texture-texture, simulate the texture of eggs. Texture: Sandstone, Zoom: 50% Highlights: 1 Select the layer style and set the parameters as shown. Create a new layer, place it on the layer, and merge the two layers (note that the background cannot be merged) 5. Select "Polygon Lasso Tool" and draw a crack in the middle of the egg. 6. Create a new layer and cut the selection to a new layer. Select Edit-Transform-rotate the two "broken" eggshell into a picture. 7, a new layer, with a white pencil tool at the edge of the eggshell to draw a thin crack, and blur tool at the end of the crack smear. Merge layers. Use the "Polygon Lasso tool" to copy one side of the eggshell, the height and contrast are set to 100, placed in the back of the eggshell layer, appropriate adjustment of size and angle, with the layer style to decorate, the parameters such as figure. 8, the same way, the other side of the eggshell lining also made, and its layer style to make appropriate adjustments. Merge two layers, and remember that because the layer style is added, the two layers are first created with two new empty layers under the merge, so that the layer styles that are merged with the layers will not change because of the merge. 9, in the eggshell layer under the new layer, with a soft black brush to add a shadow below, with a Gaussian blur, set a radius of 23. If you want to hatch something from an egg, add a small animal between the shell layer and the broken crust. Note: Users remind the cracked eggshell is a crack is dark red is not white, now make the following changes. With 1 pixels of dark red (the three-color parameter is about: R. 179 G. 0 b.46), draw a thin fissure in the egg's rupture, blur the end with a 3-pixel blur, and then set the layer's transparency to 85%. |