VMware converter standalone integrates with trueimage to migrate a hyperv VM

 

VMware converter StandaloneIntegrationTrueimageMigrate a hyperv VM

1, The most effective method is cold migration, unless forced to hot migration.

In my experiment, the Virtual Machine of hyperv is hot migrated (the Virtual Machine of hyperv is closed, but it is cold migration) and converter is displayed. fault. nohostconnection, And I disabled the firewall of VC, hyperv host, and standalone host. In the same settings, one VM can be migrated, but this error is reported for the rest.

Try to enable the hyperv VM. During Hot standalone migration, the VM cannot be accessed. In fact, I am more worried that migration to 99% will not be very miserable without response?

2. aronis true image for cold migration, regardless of p2v or V2V.

Because the hyperv VM is migrated, its VM is stopped, and then the ISO boot disk of trueimage is mounted on the CD, a hard disk is attached to the VM, so that IOS can be guided and the system drive C can be backed up to the newly added disk.

Shut down, unmount the hard disk, and mount it to another virtual Windows system. Copy the Tib backup file of the vhd of the disk and then import it directly to standalone. P2v is simpler,Ancronis
Trueimage ISOBoot the physical server, export the C disk directly to the network, and then convert it directly by converter.Trueimage
ISOUnable to identify the NIC Driver of the VM, so I added a new vmdk to the VM, and the physical server is much simpler. Note that the NIC hardware of the original VM is no longer available after the conversion. Therefore, configure the NIC to reconfigure the system.

3. standalone migration process description.

Modify the system memory and other parameters before Tib migration. After the migration, modify the VM configuration to add the vmnet3 Nic. After logging on to the system, you will find that the previous driver services of hyperv have been deleted by standalone, then you need to install vmtools to identify the newly added Nic.

Note: When setting the IP address of the NIC, first "Edit Settings" to view the VLAN corresponding to the MAC address of the VM Nic, then go to the VM system to view the Mac and set the IP address as the allowed IP address of the corresponding VLAN in the "Edit Settings" of the Mac.

0: 50 2012-9-2