The following is a simple introduction to the router can not open 192.168.1.1 how to do, integrated generally is reset and each step according to the correct operation to perform once.
The first step is to look at the instructions or routers above the tag, there are 2 important parameters, one is the gateway address, the second is the initial user name and password. Although the general default gateway is 192.168.1.1 but confirm it.
Find a finer thing and press the reset button on the route. This will reset some of the password settings.
Connect the route to the power supply to ensure proper operation (LED is normal)
If there is no line, make sure your wifi device or laptop wireless card is connected to the message (be sure to connect the signal properly).
Open the default gateway address 192.168.1.1, and then enter the default account name and password. It will open and set up normally.
Note : For more wonderful tutorials, please pay attention to the triple graphics tutorial channel,