How to turn on Bluetooth module function
This article takes Lenovo Zhaoyang K27 notebook As an example to explain how to turn on Bluetooth function.
1, first the wireless/Bluetooth external switch to the right, turn on the wireless/Bluetooth function. As shown in the figure:
2, press the "fn+f5" button, pop-up Lenovo Wireless Device Settings dialog box, the Bluetooth set to " open " state.
After this setting, the wireless and Bluetooth modules are in normal working condition.
How to add a Bluetooth-enabled device
To add a Bluetooth-enabled device to your computer, you need to do the following three things:
1, turn on the computer built-in Bluetooth module function;
2, set the Bluetooth enabled device, so that the computer can find the device. To do this, you must first: Open the device so that it can be detected.
When a Bluetooth-enabled device is in discovery mode, it broadcasts a wireless signal that allows other devices or computers to detect the device. This is sometimes referred to as "
match mode ." When most devices are in a detectable state, they are also in match mode and ready to match the computer.
3. To add Bluetooth enabled devices
(1) Click to open "
Device and printer ";
(2) Click
Add Device , and then follow the instructions.
(3) Click the Bluetooth-enabled device that you want to add to your computer, and then click
Next . If you do not see the device you want to add, make sure that the device is turned on and can be detected. If you have just opened the device, it may take several seconds for Windows to detect the device.
Windows may require you to enter a matching code (sometimes called a PIN or password). Most Bluetooth-enabled devices need to match the computer before exchanging information with each other. To do this, they must exchange protected match codes. This means that only your authorized wireless device can connect to your computer.
4, this Bluetooth device has been added successfully, it and the computer can be successfully exchanged between the data.
