Xp Machine dual-nic Internet access

Nowadays, many users purchase a network card and change it to a dual network card to save money. This saves both network fees and router money. Now I will ask you how to set up an xp dual Nic. Internet bridging and sharing. 1. Set a dial-up connection. In the control panel, click "network" and click "Add new connection. 650) this. altsrcup

Nowadays, many users purchase a network card and change it to a dual network card to save money. This saves both network fees and router money. Now I will ask you how to set up an xp dual Nic. Internet bridging and sharing.

1. Set a dial-up connection. In the control panel, click "network" and click "Add new connection.

 

 

Click Next. After the settings are complete, go to advanced options. Set a shared connection.

 

 

Now we set two NICs to bridge, and select two NICs. Right-click and select bridge.

 

Right-click network bridging and set properties. Set tCp/The ip property is automatically obtained.

The obtained address is 192.168.0.1 255.255.255.255.0. There is no gateway.

Manually set the gateway to 192.168.0.1

Server.

 

 

Now let's set up the client machine. That is, to connect the other end of the server Nic.

Manually set the Client IP address to 192.168.0.X 255.255.255.0 192.168.0.1 DNS: 192.168.0.1

Can I do this on the client first?PingYou can resolve the issue at www.51cto.com.

 

 

 

Troubleshooting. If the client cannot ping the Internet. Click broadband connection on the server.

Set the following options.This is very important !!!

 

In this way, one xp can drive another xp to access the internet !!! Of course, window 7 is also acceptable.