linux xxd命令

來源:互聯網
上載者:User
請在地址欄輸入要查詢的 linux 命令。如:訪問 http://www.npcsc.com/man/wget 將獲得 wget 命令的使用說明。type linux command behind the site url ,eg : http://www.npcsc.com/man/wget ,this will get the useage of wget .( 預設返回的是 html 格式的頁面,如果需要查詢文本形式頁面,可以在命令後面加上 '.txt')we return html page by default.you can appoint the return format ( only support html and txt)
XXD(1)                                                                  XXD(1)NAME       xxd - make a hexdump or do the reverse.SYNOPSIS       xxd -h[elp]       xxd [options] [infile [outfile]]       xxd -r[evert] [options] [infile [outfile]]DESCRIPTION       xxd  creates a hex dump of a given file or standard input.  It can also       convert a hex dump back to its original binary form.  Like  uuencode(1)       and  uudecode(1)  it allows the transmission of binary data in a `mail-       safe' ASCII representation, but has the advantage of decoding to  stan-       dard output.  Moreover, it can be used to perform binary file patching.OPTIONS       If no infile is given, standard input is read.  If infile is  specified       as  a  `-'  character,  then input is taken from standard input.  If no       outfile is given (or a `-' character is in its place), results are sent       to standard output.       Note  that  a  "lazy" parser is used which does not check for more than       the first option letter, unless the option is followed by a  parameter.       Spaces  between  a single option letter and its parameter are optional.       Parameters to options can be specified in decimal, hexadecimal or octal       notation.  Thus -c8, -c 8, -c 010 and -cols 8 are all equivalent.       -a | -autoskip              toggle  autoskip: A single '*' replaces nul-lines.  Default off.       -b | -bits              Switch to bits (binary digits) dump, rather than hexdump.   This              option  writes octets as eight digits "1"s and "0"s instead of a              normal hexadecimal dump. Each line is preceded by a line  number              in  hexadecimal and followed by an ascii (or ebcdic) representa-              tion. The command line switches -r, -p, -i do not work with this              mode.       -c cols | -cols cols              format   octets per line. Default 16 (-i: 12, -ps: 30, -b:              6). Max 256.       -E | -EBCDIC              Change the character encoding in the righthand column from ASCII              to EBCDIC.  This does not change the hexadecimal representation.              The option is meaningless in combinations with -r, -p or -i.       -g bytes | -groupsize bytes              separate the output of every  bytes (two  hex  characters              or eight bit-digits each) by a whitespace.  Specify -g 0 to sup-              press grouping.   defaults to 2 in normal mode and  1  in              bits  mode.   Grouping  does  not apply to postscript or include              style.       -h | -help              print a summary of available commands and exit.  No hex  dumping              is performed.       -i | -include              output  in C include file style. A complete static array defini-              tion is written (named after the input file), unless  xxd  reads              from stdin.       -l len | -len len              stop after writing  octets.       -p | -ps | -postscript | -plain              output  in  postscript  continuous  hexdump style. Also known as              plain hexdump style.       -r | -revert              reverse operation: convert (or patch) hexdump into  binary.   If              not  writing  to stdout, xxd writes into its output file without              truncating it. Use the combination -r -p to read plain hexadeci-              mal dumps without line number information and without a particu-              lar column layout. Additional  Whitespace  and  line-breaks  are              allowed anywhere.       -seek offset              When used after -r: revert with  added to file positions              found in hexdump.       -s [+][-]seek              start at  bytes abs. (or rel.) infile offset.  + indicates              that  the  seek  is  relative to the current stdin file position              (meaningless when not reading from stdin).  - indicates that the              seek  should  be  that many characters from the end of the input              (or if combined with +: before the current stdin file position).              Without -s option, xxd starts at the current file position.       -u     use upper case hex letters. Default is lower case.       -v | -version              show version string.CAVEATS       xxd -r has some builtin magic while evaluating line number information.       If the output file is seekable, then the linenumbers at  the  start  of       each  hexdump  line may be out of order, lines may be missing, or over-       lapping. In these cases xxd will lseek(2) to the next position. If  the       output  file  is  not  seekable,  only  gaps are allowed, which will be       filled by null-bytes.       xxd -r never generates parse errors. Garbage is silently skipped.       When editing hexdumps, please note that xxd -r skips everything on  the       input line after reading enough columns of hexadecimal data (see option       -c). This also means, that changes to the printable ascii  (or  ebcdic)       columns  are  always  ignored.  Reverting a plain (or postscript) style       hexdump with xxd -r -p  does  not  depend  on  the  correct  number  of       columns.  Here  anything that looks like a pair of hex-digits is inter-       preted.       Note the difference between       % xxd -i file       and       % xxd -i < file       xxd -s +seek may be different from xxd -s seek, as lseek(2) is used  to       "rewind" input.  A '+' makes a difference if the input source is stdin,       and if stdin's file position is not at the start of  the  file  by  the       time  xxd  is  started and given its input.  The following examples may       help to clarify (or further confuse!)...       Rewind stdin before reading; needed because the `cat' has already  read       to the end of stdin.       % sh -c "cat > plain_copy; xxd -s 0 > hex_copy" < file       Hexdump  from  file  position  0x480 (=1024+128) onwards.  The `+' sign       means "relative to the current position", thus the `128' adds to the 1k       where dd left off.       %  sh -c "dd of=plain_snippet bs=1k count=1; xxd -s +128 > hex_snippet"       < file       Hexdump from file position 0x100 ( = 1024-768) on.       % sh -c "dd of=plain_snippet bs=1k count=1; xxd -s +-768 > hex_snippet"       < file       However,  this is a rare situation and the use of `+' is rarely needed.       The author prefers to monitor the  effect  of  xxd  with  strace(1)  or       truss(1), whenever -s is used.EXAMPLES       Print everything but the first three lines (hex 0x30 bytes) of file.       % xxd -s 0x30 file       Print 3 lines (hex 0x30 bytes) from the end of file.       % xxd -s -0x30 file       Print 120 bytes as continuous hexdump with 20 octets per line.       % xxd -l 120 -ps -c 20 xxd.1       2e54482058584420312022417567757374203139       39362220224d616e75616c207061676520666f72       20787864220a2e5c220a2e5c222032317374204d       617920313939360a2e5c22204d616e2070616765       20617574686f723a0a2e5c2220202020546f6e79       204e7567656e74203c746f6e79407363746e7567       Hexdump the first 120 bytes of this man page with 12 octets per line.       % xxd -l 120 -c 12 xxd.1       0000000: 2e54 4820 5858 4420 3120 2241  .TH XXD 1 "A       000000c: 7567 7573 7420 3139 3936 2220  ugust 1996"       0000018: 224d 616e 7561 6c20 7061 6765  "Manual page       0000024: 2066 6f72 2078 7864 220a 2e5c   for xxd"../       0000030: 220a 2e5c 2220 3231 7374 204d  "../" 21st M       000003c: 6179 2031 3939 360a 2e5c 2220  ay 1996../"       0000048: 4d61 6e20 7061 6765 2061 7574  Man page aut       0000054: 686f 723a 0a2e 5c22 2020 2020  hor:../"       0000060: 546f 6e79 204e 7567 656e 7420  Tony Nugent       000006c: 3c74 6f6e 7940 7363 746e 7567   output_file       Patch the date in the file xxd.1       % echo "0000037: 3574 68" | xxd -r - xxd.1       % xxd -s 0x36 -l 13 -c 13 xxd.1       0000036: 3235 7468 204d 6179 2031 3939 36  25th May 1996       Create  a  65537 byte file with all bytes 0x00, except for the last one       which is 'A' (hex 0x41).       % echo "010000: 41" | xxd -r > file       Hexdump this file with autoskip.       % xxd -a -c 12 file       0000000: 0000 0000 0000 0000 0000 0000  ............       *       000fffc: 0000 0000 40                   ....A       Create a 1 byte file containing a single  'A'  character.   The  number       after '-r -s' adds to the linenumbers found in the file; in effect, the       leading bytes are suppressed.       % echo "010000: 41" | xxd -r -s -0x10000 > file       Use xxd as a filter within an editor such as vim(1) to hexdump a region       marked between `a' and `z'.       :'a,'z!xxd       Use xxd as a filter within an editor such as vim(1) to recover a binary       hexdump marked between `a' and `z'.       :'a,'z!xxd -r       Use xxd as a filter within an editor such as vim(1) to recover one line       of a hexdump.  Move the cursor over the line and type:       !!xxd -r       Read single characters from a serial line       % xxd -c1 < /dev/term/b &       % stty < /dev/term/b -echo -opost -isig -icanon min 1       % echo -n foo > /dev/term/bRETURN VALUES       The following error values are returned:       0      no errors encountered.       -1     operation not supported ( xxd -r -i still impossible).       1      error while parsing options.       2      problems with input file.       3      problems with output file.       4,5    desired seek position is unreachable.SEE ALSO       uuencode(1), uudecode(1), patch(1)WARNINGS       The  tools  weirdness matches its creators brain.  Use entirely at your       own risk. Copy files. Trace it. Become a wizard.VERSION       This manual page documents xxd version 1.7AUTHOR       (c) 1990-1997 by Juergen Weigert              Distribute freely and credit me,       make money and share with me,       lose money and don't ask me.       Manual page started by Tony Nugent               Small changes by Bram Moolenaar.  Edited by Juergen Weigert.Manual page for xxd               August 1996                           XXD(1)

聯繫我們

該頁面正文內容均來源於網絡整理,並不代表阿里雲官方的觀點,該頁面所提到的產品和服務也與阿里云無關,如果該頁面內容對您造成了困擾,歡迎寫郵件給我們,收到郵件我們將在5個工作日內處理。

如果您發現本社區中有涉嫌抄襲的內容,歡迎發送郵件至: info-contact@alibabacloud.com 進行舉報並提供相關證據,工作人員會在 5 個工作天內聯絡您,一經查實,本站將立刻刪除涉嫌侵權內容。

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.