MSA2000命令列配置資訊

標籤：msa 命令列配置

1、查看虛擬磁碟

# show vdisks

2、查看啟動的服務

# show protocols 

3、查看IP地址：

# show network-parameters 

4、設定IP地址：

set network-parameters

  [ip <address>]

  [netmask <netmask>]

  [gateway <gateway>]

  controller a|b

  # set network-parameters dhcp

  # set network-parameters ip 192.168.0.10 netmask 255.255.255.0

  gateway 192.168.0.1 controller a

  Success: Network parameters have been changed

5、更換控制器或者盤櫃後，盤櫃的ID編碼不正確（例如本來是盤櫃2，更換之後變成了盤櫃3等）

    # rescan

  Success: Command completed successfully

6、把offline添加到vdisk中

# trust 

EXAMPLE

Enable the trust command and then trust vdisk VD1:

  # trust enable

  Trust Virtual-disk Enabled.

  # trust vdisk VD1

  Are you sure? yes

  Virtual-disk VD1 has been trusted.

7、FTP重新整理韌體：

    登陸ftp

    如果發現FTP被拒絕，說明沒有enableFTP服務

    put 檔案名稱 flash 

MSA2000命令列配置資訊