openWrt 安裝與實踐 II

標籤：--   ace   分享   host-only   global   src   實踐   open   prot   

1. 啟動ubuntu上面的openwrt虛擬機器之後, 設定一下虛擬機器的網卡:

第1個網卡: Host-only

第2個網卡: NAT

 

2. 查看網路設定:

[email protected]:/etc/config# cat network

config interface ‘loopback‘
        option ifname ‘lo‘
        option proto ‘static‘
        option ipaddr ‘127.0.0.1‘
        option netmask ‘255.0.0.0‘

config interface ‘lan‘
        option ifname ‘eth0‘
        option type ‘bridge‘
        option proto ‘static‘
        option ipaddr ‘192.168.1.254‘
        option netmask ‘255.255.255.0‘
        option ip6assign ‘60‘

config interface ‘wan‘
        option ifname ‘eth1‘
        option proto ‘dhcp‘

config interface ‘wan6‘
        option ifname ‘eth1‘
        option proto ‘dhcpv6‘

config globals ‘globals‘
        option ula_prefix ‘fd43:e822:82cf::/48‘

用ifconfig|grep addr命令, 可以看到eth1的ip是192.168.127.129:

[email protected]:/etc/config# ifconfig|grep add
br-lan    Link encap:Ethernet  HWaddr 00:0C:29:09:43:FB
          inet addr:192.168.1.254  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fd43:e822:82cf::1/60 Scope:Global
          inet6 addr: fe80::20c:29ff:fe09:43fb/64 Scope:Link
eth0      Link encap:Ethernet  HWaddr 00:0C:29:09:43:FB
          Interrupt:19 Base address:0x2000
eth1      Link encap:Ethernet  HWaddr 00:0C:29:09:43:05
          inet addr:192.168.127.129  Bcast:192.168.127.255  Mask:255.255.255.0
          inet6 addr: fe80::20c:29ff:fe09:4305/64 Scope:Link
          Interrupt:19 Base address:0x2080
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host

 3. 檢查一下是否能訪問網路:

[email protected]:/etc/config# ping baidu.com
PING baidu.com (111.13.101.208): 56 data bytes
64 bytes from 111.13.101.208: seq=0 ttl=128 time=46.149 ms
64 bytes from 111.13.101.208: seq=1 ttl=128 time=47.142 ms
^C
--- baidu.com ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 46.149/46.645/47.142 ms

升級一下luci吧:

opkg update

opkg install luci

/etc/init.d/uhttpd enable

/etc/init.d/uhttpd start

/etc/init.d/firewall stop

然後開啟防火牆.

接著就可以在windows上面開啟luci了.

 

 

接下來就可以在web介面上折騰了...

 

openWrt 安裝與實踐 II