XManager串連Linux的設定

XManager串連Linux的設定 不同版本的linux所在的位置不一樣檔案名稱也不一樣在red hat 4 裡面有三步第一步找到/etc/inittab把預設層級改為5id：5：initdefault 第二步找到/etc/X11/gdm/gdm.conf確保該檔案中有以下幾句配置Enable=trueDisplaysPerHost=10Port=177iptables  -A  INPUT  -p udp -s 0/0 -d 0/0 --dport 177 -j ACCEPT（如果防火牆開啟，要加入177 連接埠過濾）允許以root 用身份登陸：[security]DisallowTCP=yes AllowRemoteRoot=true 第三步 後在終端輸入service iptables saverestart gdm using commandgdm-restartor restart X11 using the commandinit 3 && init 5 在red hat 5 裡面也有三步第一步找到/etc/inittab把預設層級改為5id：5：initdefault： 第二步找到/usr/share/gdm/defaults.conf確保該檔案中有以下幾句配置Enable=trueDisplaysPerHost=10Port=177iptables  -A  INPUT  -p udp -s 0/0 -d 0/0 --dport 177 -j ACCEPT 第三步 後在終端輸入service iptables saverestart gdm using commandgdm-restartor restart X11 using the commandinit 3 && init 5 也可以用gdmsetup 圖形介面進行配置。 以下是其它一些作業系統的相關設定：Red Hat and RHEL (Red hat 7, 8, 9 / RHEL 3, 4, 5)1. Display manager configuration? Change runlevel to 5Open/etc/inittab and set the initial runlevel to 5 as following:id:5:initdefault:? Configure GDM If you are using kdm, skip this section and go to 'Configure KDM' section below.Open the following GDM configuration file and set the Enable entry to true in the [xdmcp] section: /etc/X11/gdm/gdm.conf (Red Hat 7, 8, 9, RHEL 3)/etc/gdm/custom.conf (RHEL 4, 5, 6, If the file does not exists, create one)[xdmcp]Enable=true? Configure KDMIf you are using gdm, you can skip this step.1. If you are using RHEL 4 or later release, skip this step. Otherwise, open /etc/X11/xdm/xdm-config and comment out the "requestPort" option as following:DisplayManager.requestPort: 0 ==>!DisplayManager.requestPort: 02. Open /usr/share/config/kdm/Xaccess and remove the initial "#" character for the following line:#* #any host can get a login window ==>* #any host can get a login window3. Open /usr/share/config/kdm/kdmrc and set the Enable entry to true in the [xdmcp] section as following.[xdmcp]Enable=true2. Firewall (TCP/UDP Ports) ConfigurationOpen UDP port 177 from the PC to the remote host direction.Open incoming TCP ports 6000~6010 from the remote host to your PC.3. Reboot the remote host and start Xmanager# init 3; init 5  CentOS (4, 5, 6)1. Display manager configuration? Change runlevel to 5Open/etc/inittab and set the initial runlevel to 5 as following:id:5:initdefault:? Configure GDM If you are using kdm, skip this section and go to 'Configure KDM' section below.Open the following GDM configuration file and set the Enable entry to true in the [xdmcp] section: /etc/X11/gdm/gdm.conf (CentOS 4)/etc/gdm/custom.conf (CentOS 5, 6, If the file does not exists, create one)[xdmcp]Enable=1? Configure KDMIf you are using gdm, you can skip this step.Open /etc/X11/xdm/Xaccess and remove the # character in front of the line:#* #any host can get a login window ==>  * #any host can get a login windowThen, find the [xdmcp]  section in the /etc/kde/kdm/kdmrc file and set Enable to true like the following example:[xdmcp]Enable=1 (or 'true')2. Firewall (TCP/UDP Ports) ConfigurationOpen UDP port 177 from the PC to the remote host direction.Open incoming TCP ports 6000~6010 from the remote host to your PC.3. Reboot the remote host and start Xmanager# init 3; init 5  Ubuntu (8.x, 9.1, 10.04, 10.10, 11.10, 12.04)1. Display manager configuration? GDM (Ubuntu 10.10 and previous releases)If you are using Ubuntu 11.10 or later releases, skip to the 'Configure LightDM' section.Open the following GDM configruation fileUbuntu 8.x: /etc/gdm/gdm.conf-custom or /etc/X11/gdm/gdm.conf Ubuntu 9.1, 10.04, 10.10: /etc/gdm/custom.conf  and set Enable to 1 in the [xdmcp] section and DisallowTCP to false in the [security] section as following.[xdmcp]Enable=1[security]DisallowTCP=false*Ubuntu 10.10 had a bug in its GDM (v 2.30.5) that only allowed IPv6 connections which caused Xmanager to fail connecting to the host. This bus was fixed in GDM version 2.32.0. ? Configure LightDM (Ubuntu 11.10 and 12.04)If you are using Ubuntu 10.10 or previous releases, you can skip this part.Create the /etc/lightdm/lightdm.conf file and save the following lines: [XDMCPServer]enabled=true*In order to use Xmanager with LightDM, you must upgrade Xmanager to the latest release. Use the Help > Check for Updates menu to upgrade. 2. Firewall (TCP/UDP Ports) ConfigurationOpen UDP port 177 from the PC to the remote host direction.Open incoming TCP ports 6000~6010 from the remote host to your PC.3. Restart display manager and start Xmanager? To restart gdm (gdm users only)# init 3; init 5 (Ubuntu 8.x)# /etc/init.d/gdm restart (Ubuntu 9.1, 10.04, 10.10)? To restart LightDM# service lightdm restartOpenSuse, Suse and Suse Enterprise Server (Suse 8, 9, 10 / Suse Enterprise Server 9.x, 10.x / OpenSuse 10.x, 11.0)1. Display manager configuration? Change runlevel to 5Open/etc/inittab and set the initial runlevel to 5 as following:id:5:initdefault:? Configure GDM If you are using kdm, skip this section and go to 'Configure KDM' section below.Open the following GDM configuration file and set Enable to true in the [xdmcp] section and DisallowTCP to false in the [security] section: /etc/X11/gdm/gdm.conf (Suse 8, 9, 10, Suse Enterprise Server 9.x, 10.x)/etc/gdm/custom.conf (OpenSuse 10.x, 11.0. If the file does not exists, create one)[xdmcp]Enable=1[security]DisallowTCP=false? Configure KDMIf you are using gdm, you can skip this step.Open /etc/X11/gdm/gdm.conf and remove the # character in front of the line:#* #any host can get a login window ==> * #any host can get a login windowThen, find the [xdmcp]  section in the /etc/opt/kde3/share/config/kdm/kdmrc file and set Enable to true like the following example:[xdmcp]Enable=true2. Firewall (TCP/UDP Ports) ConfigurationOpen UDP port 177 from the PC to the remote host direction.Open incoming TCP ports 6000~6010 from the remote host to your PC.3. Reboot the remote host and start Xmanager# init 3; init 5 Fedora and Fedora Core (Fedora Core 1, 2, 3, 4, 5, 6 / Fedora 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17)1. Display manager configuration? Change runlevel to 5Open/etc/inittab and set the initial runlevel to 5 as following:id:5:initdefault:? Configure GDMIf you are using kdm, skip this section and go to 'Configure KDM' section below.Open the following GDM configuration file/etc/X11/gdm/gdm.conf (Fedora Core 4 and prior releases)/etc/gdm/custom.conf (Fedoar Core 5 and later releases)and set the Enable to 1 in the [xdmcp] section and DisallowTCP to false in the [security] section like the following example:[xdmcp]Enable=1[security]DisallowTCP=false? Configure KDMIf you are using gdm, you can skip this step.1. Open /etc/X11/xdm/xdm-config comment out the "requestPort" option as following:DisplayManager.requestPort: 0 ==>!DisplayManager.requestPort: 02. Open /etc/X11/xdm/Xaccess and remove the initial "#" character for the following line:#* #any host can get a login window ==>* #any host can get a login window3. Open /etc/kde/kdm/kdmrc and set the Enable entry to true in the [xdmcp] section as following.[xdmcp]Enable=true2. Firewall (TCP/UDP Ports) ConfigurationOpen UDP port 177 from the PC to the remote host direction.Open incoming TCP ports 6000~6010 from the remote host to your PC.3. Reboot the remote host and start Xmanager# init 3; init 5  Solaris (8, 9, 10)1. XDM Configuration# /usr/dt/bin/dtconfig -e [Enable]2. Firewall (TCP/UDP Ports) ConfigurationOpen UDP port 177 from the PC to the remote host direction.Open incoming TCP ports 6000~6010 from the remote host to your PC.3. Reboot the remote host and start Xmanager  AIX (4.X, 5.X)1. XDM Configuration# /usr/dt/bin/dtconfig -e [Enable]2. Firewall (TCP/UDP Ports) ConfigurationOpen UDP port 177 from the PC to the remote host direction.Open incoming TCP ports 6000~6010 from the remote host to your PC.3. Reboot the remote host and start Xmanager  HP-UX (10.X, 11.X)1. XDM Configuration# /usr/dt/bin/dtconfig -e [Enable]2. Firewall (TCP/UDP Ports) ConfigurationOpen UDP port 177 from the PC to the remote host direction.Open incoming TCP ports 6000~6010 from the remote host to your PC.3. Reboot the remote host and start XmanagerOracle Linux1. Display manager configuration? Change runlevel to 5Open/etc/inittab and set the initial runlevel to 5 as following:id:5:initdefault:? Configure GDMIf you are using kdm, skip this section and go to 'Configure KDM' section below.Open /etc/X11/gdm/gdm.conf and set the Enable entry to 1 in the [xdmcp] section as following.[xdmcp]Enable=1? Configure KDMIf you are using gdm, you can skip this step.Open /etc/X11/xdm/xdm-config comment out the "requestPort" option as following:DisplayManager.requestPort: 0 ==>!DisplayManager.requestPort: 0Open /etc/X11/xdm/Xaccess and remove the initial "#" character for the following line:#* #any host can get a login window ==>* #any host can get a login windowOpen /etc/kde/kdm/kdmrc and set the Enable entry to true in the [xdmcp] section as following.[xdmcp]Enable=true2. Firewall (TCP/UDP Ports) ConfigurationOpen UDP port 177 from the PC to the remote host direction.Open incoming TCP ports 6000~6010 from the remote host to your PC.3. Reboot the remote host and start Xmanager# init 3; init 5