solaris 10安裝配置

solaris 10安裝配置 1、系統安裝root/changeme建立使用者和密碼 create /SP/users/scadmin set /SP/users/scadmin role=Administrator（管理員權限）scadmin/scadmin123show /SP/users/scadmincd /SP/networkset pendingipaddress=192.168.0.5set pendingipdiscovery=staticset pendingipnetmask=255.255.255.0set pendingipgateway=192.168.0.254set commitpending=trueset state=enabledshow /SP/network start /SYS   （為系統加電，相當於按面板前面的白色電源開關）start /SP/console -f (進入系統控制台，查看系統加電啟動過程)show faulty中間需要設定一個root密碼 使用root 進入系統 ，init 0進入ok模式ok boot dvd這裡可以從遠程安裝，先用zfs建立image，nfs發布這裡到選擇安裝方式的時候選擇nfs --------------------------------------------------------------------------------------2、eis安裝./setup-standard.sh注意：選國家code時候選擇3 然後輸入CN如果上面選錯,可以輸入explorer進行收集日誌explorer -g           進行修改.--------------------------------------------------------------------------------------3、系統patch安裝讀readme檔案./installpatchset --s10patchset--------------------------------------------------------------------------------------4、IPMP配置root@WOLF # cat /etc/hosts::1     localhost       127.0.0.1       localhost       172.16.0.3      WOLF        loghostroot@WOLF # ls -l host*-rw-r--r--   1 root     root           9 May 29 14:57 hostname.igb0-rw-r--r--   1 root     root          37 May 30 11:26 hostname.usbecm0lrwxrwxrwx   1 root     root          12 May 29 14:10 hosts -> ./inet/hostvi hostname.igb0  (加入下面的內容)WOLF netmask + broadcast + group ipmp0 uproot@WOLF # vi hostname.igb1     （建立hostname.igb2檔案，加入以下內容。）group ipmp0 standby up--------------------------------------------------------------------------------------5、進入系統zfs建立及掛載zpool listdf -hcd /usrmkdir localcd localmkdir bccpzpool listzpool statusformatprtvtoc /dev/rdsk/c0t5000CCA03C70EF48d0s2 |fmthard -s - /dev/rdsk/c0t5000CCA03C710D10d0s2fmthard:  New volume table of contents now in place.zpool create -f WOLFppool /dev/dsk/c0t5000CCA03C710D10d0s0zpool create -f WOLFpool /dev/dsk/c0t5000CCA03C710D10d0s0zpool listzfs set mountpoint=/usr/local/bccp WOLFpoolzfs set mountpoint=/usr/local/mccp WOLFpooldf -h----------------------------------------------------------------------------------------6、建使用者和組root@WOLF # bashroot@WOLF # groupadd -g 100 scadaroot@WOLF # useradd -u 1002 -g scada -d /usr/local/WOLF WOLFuseradd -u 1002 -g scada -d /usr/local/WOLF WOLFroot@WOLF # pass WOLFpassmgmt  passwd    root@WOLF # passwd WOLFNew Password: Re-enter new Password: passwd: password successfully changed for WOLFmkdir /usr/local/grouproot@WOLF # chown -R bccp:scada /usr/local/groupchown -R mccp:scada /usr/local/grouproot@WOLF # chown -R bccp:scada /usr/local/bccpchown -R mccp:scada /usr/local/mccp------------------------------------------------------------------------------------------*7、硬碟dd複製(有問題)prtvtoc /dev/rdsk/c0t5000CCA03C70BBFCd0s2 |fmthard -s - /dev/rdsk/c0t5000CCA03C7101A8d0s2dd if=/dev/dsk/c0t5000CCA03C70BBFCd0s2 of=dev/dsk/c0t5000CCA03C7101A8d0s2 bs=1024k----------------------------------------------------------------------------------------8、root密碼設定錯了，從新設定sys-unconfig進入ok模式然後 boot 對系統內容參數進行從新設定。