STM32 對內部FLASH讀寫介面函數

標籤：des   style   color   strong   資料   art   

因為要用內部FLASH代替外部EEPROM，把參數放在STM32的0x08000000+320K處，其中20K是bootloader，300K是應用程式。

原理：先要把整頁FLASH的內容搬到RAM中，然後在RAM中改動，然後擦除整頁FLASH，再把改動後的內容寫入原Flash頁。下面程式調試通過。

/*******************************************************************************
* Function Name  : I2C_EE_BufferRead
* Description    : Reads a block of data from the EEPROM.
* Input          :
*                  -RomAddr
*                  -NumByteToRead
*                  -pRomData
* Output         : None
* Return         : None
*******************************************************************************

void I2C_EE_BufferRead(u16 RomAddr,u16 NumByteToRead,u8 *pRomData)
{ 

    u32 param_flashbase;
    u8* ptr;

    param_flashbase = 0x8000000+(300+20)*1024;
    ptr = (u8*)(param_flashbase + RomAddr);

    while( NumByteToRead-- >0)
    {
        *pRomData = *ptr;            //直接賦值即可
         printf("0x%x ",*pRomData); 
         pRomData++;
         ptr++;
    }
    return;
} 

 

/*******************************************************************************
* Function Name  : I2C_EE_BufferWrite

* Description    : Write a block of data to the EEPROM.
* Input          :
*                  -RomAddr
*                  -NumByteToRead
*                  -pRomData
* Output         : None
* Return         : None
*******************************************************************************

void I2C_EE_BufferWrite(u8 DeviceType,u8 SlaveAddr,u16 RomAddr,u16 NumByteToWrite,u8 *pRomData)
{

  uint32_t param_flashbase;
  uint32_t  tempaddress;
  uint32_t  startaddress;
  uint32_t FlashAddress;
  uint32_t datasource;
  u8 buf1[PAGE_SIZE];
  u8 buf2[PAGE_SIZE];
  u32 pagenumber = 0x0;
  u32 EraseCounter = 0x0;
  u32 i = 0;
  FLASH_Status FLASHStatus = FLASH_COMPLETE;

  param_flashbase = 0x8000000+(300+20)*1024;
  startaddress=tempaddress = param_flashbase+RomAddr;

 /*********************起始指標不在Flash頁的開始端*********************
 if( (tempaddress%PAGE_SIZE) != 0)
 {   printf("startptr  not in Page head \r\n");
  if(  ((startaddress%PAGE_SIZE)+NumByteToWrite) >  PAGE_SIZE   ) /*超出一頁範圍
  {
      I2C_EE_BufferRead(0,0,(tempaddress-(tempaddress % PAGE_SIZE)),PAGE_SIZE,buf1);  /*把起始地址所在頁的內容讀到記憶體buf1中
      memcpy(buf1+(tempaddress % PAGE_SIZE),pRomData,PAGE_SIZE-(tempaddress % PAGE_SIZE));  /*把需要寫入的資料覆蓋到buf1中

      while(  FLASHStatus == FLASH_ErasePage(tempaddress)   )       /*buf1寫入到Flash
     {
         i=PAGE_SIZE/4;
         datasource = (uint32_t)buf1;
    
         FlashAddress = tempaddress-(tempaddress % PAGE_SIZE);
         while(i-- >0)
         {
             FLASH_ProgramWord(FlashAddress,*(uint32_t*)datasource);
             if (*(uint32_t*)FlashAddress != *(uint32_t*)datasource)           
         {
          printf("I2C_EE_BufferWrite error!\r\n");
          return ;
          }
          datasource += 4;
          FlashAddress += 4;    
    }
    break;
   }
      
   NumByteToWrite -= PAGE_SIZE-(startaddress % PAGE_SIZE); 需要寫入位元組數減去，上面覆蓋上去的資料的位元組數
   tempaddress +=  PAGE_SIZE-(tempaddress % PAGE_SIZE);        /*把ptr指標指向下一個頁起始位置

   if((NumByteToWrite % PAGE_SIZE) != 0) /*末指標不在Flash頁的開始端
   {
       //讀取1 PAGE 資料到記憶體，修改，然後寫進去
       I2C_EE_BufferRead(0,0,tempaddress,PAGE_SIZE,buf2);
       memcpy(buf2,pRomData+PAGE_SIZE-startaddress%PAGE_SIZE+NumByteToWrite-NumByteToWrite%PAGE_SIZE,(NumByteToWrite%PAGE_SIZE));

    while(  FLASHStatus == FLASH_ErasePage( tempaddress+NumByteToWrite) )   /*把buf2寫入到Flash中*
    {
        i=PAGE_SIZE/4;
        datasource = (uint32_t)buf2;
        FlashAddress = (tempaddress+NumByteToWrite-(NumByteToWrite % PAGE_SIZE));  /*末地址指標的頁首
        while(i-- >0)
       {
           FLASH_ProgramWord(FlashAddress,*(uint32_t*)datasource);
           if (*(uint32_t*)FlashAddress != *(uint32_t*)datasource)            
           {
                printf("I2C_EE_BufferWrite error!\r\n");
                return ;
            }
            datasource += 4;
            FlashAddress += 4;          

      }
     break;
    }      
   }
  
   NumByteToWrite -= NumByteToWrite % PAGE_SIZE;
    
   //擦除Flash
    pagenumber =  NumByteToWrite/PAGE_SIZE;

     for (EraseCounter = 0; (EraseCounter < pagenumber) && (FLASHStatus == FLASH_COMPLETE); EraseCounter++)
   {
         FLASHStatus = FLASH_ErasePage( tempaddress + PAGE_SIZE*EraseCounter );
   }
   //寫Flash
   datasource = *(uint32_t *)(pRomData+ PAGE_SIZE-(startaddress % PAGE_SIZE)  );
   FlashAddress = tempaddress;
 
   while( pagenumber-- > 0 )
   {
    i=PAGE_SIZE/4;
    while(i -- >0)
    {
            FLASH_ProgramWord(FlashAddress,*(uint32_t*)datasource);
            if (*(uint32_t*)FlashAddress != *(uint32_t*)datasource)
           {
               printf("I2C_EE_BufferWrite error!\r\n");
               return ;
           }
           datasource += 4;
           FlashAddress += 4;
    }
   }
  }
  else /*寫的內容沒有超出一頁範圍
  {
   printf("FlashWrire --in one page \r\n");
   I2C_EE_BufferRead(0,0,(startaddress-(startaddress % PAGE_SIZE)),PAGE_SIZE,buf1);     /*把起始地址所在頁的內容讀到記憶體buf1中   
   memcpy( (buf1+(tempaddress % PAGE_SIZE)),pRomData, NumByteToWrite );  /*把需要寫入的資料覆蓋到buf1中
   while(  FLASHStatus == FLASH_ErasePage(tempaddress)   )
   {
      i=PAGE_SIZE/4;
      datasource = (uint32_t)buf1;
      FlashAddress = tempaddress-(tempaddress % PAGE_SIZE);
      while(i-- >0)
      {
        FLASH_ProgramWord(FlashAddress,*(uint32_t*)datasource);
        if (*(uint32_t *)FlashAddress != *(uint32_t *)datasource) /*讀取Flash中的資料，看是否寫入正確
        {
               printf("I2C_EE_BufferWrite error!\r\n");
               return ;
        }
        datasource += 4;
        FlashAddress += 4;    
    }
    break;
   }
  }
 }
/*******************起始指標在Flash頁的開始端****************************
 else
 { printf("startptr  in Page head \r\n");
  if((NumByteToWrite % PAGE_SIZE) != 0)
  {
    //讀取1 PAGE 資料到記憶體，修改，然後寫進去
   I2C_EE_BufferRead(0,0,(u16)(tempaddress+NumByteToWrite-(NumByteToWrite % PAGE_SIZE)),PAGE_SIZE,buf1);
   printf("already copy to bug1 \r\n");
   memcpy(buf1,pRomData+NumByteToWrite-(NumByteToWrite % PAGE_SIZE),(NumByteToWrite % PAGE_SIZE));

//end of debug
  }
  //擦除Flash
  if( (NumByteToWrite%PAGE_SIZE) == 0 )
  {
       pagenumber = NumByteToWrite/PAGE_SIZE;
  }
  else
  {
       pagenumber = NumByteToWrite/PAGE_SIZE + 1;
  }
   for (EraseCounter = 0; (EraseCounter < pagenumber) && (FLASHStatus == FLASH_COMPLETE); EraseCounter++)
  {
        FLASHStatus = FLASH_ErasePage(startaddress + (PAGE_SIZE * EraseCounter));
  }

  //寫Flash
  if( pagenumber == 1)   /*只有一頁
  {   

   i=PAGE_SIZE/4;
   datasource = (uint32_t)buf1;
   FlashAddress = startaddress;
   while(i-- >0)
   {
        FLASH_ProgramWord(FlashAddress,*(uint32_t *)datasource);
        if (*(uint32_t *)FlashAddress != *(uint32_t *)datasource)
        {
            printf("I2C_EE_BufferWrite error!\r\n");
            return ;
        }
        datasource +=4;
        FlashAddress +=4;
   }  
  }
  else /*很多頁時，先寫前面頁，最後寫buf1
  {
   while( pagenumber-- > 1 )
   {
    datasource = (u32)pRomData;
    FlashAddress = startaddress;
    i=PAGE_SIZE/4;
    while(i -- >0)
    {
            FLASH_ProgramWord( FlashAddress, *(uint32_t *)datasource );
            if (*(uint32_t *)FlashAddress != *(uint32_t *)datasource)
            {
                  printf("I2C_EE_BufferWrite error!\r\n");
                  return ;
            }
            datasource += 4;
            FlashAddress += 4;
    } 
   }
   //寫後面的頁
   datasource = (uint32_t)buf1;
   FlashAddress = startaddress+(pagenumber-1)*PAGE_SIZE;
   i=PAGE_SIZE/4;
   while(i -- >0)
   {
       FLASH_ProgramWord( FlashAddress, *(uint32_t *)datasource );
       if (*(uint32_t *)FlashAddress != *(uint32_t *)datasource)
       {
             printf("I2C_EE_BufferWrite error!\r\n");
             return ;
       }
       datasource += 4;
       FlashAddress += 4;
   } 
  }    
 } 
}