[. Net] development environment configuration instructions based on Windows Mobile 5.0

Recently, I started to develop smart devices. I have read a lot of beginner materials. In fact, there are many similar instructions on the Internet. However, I found that there are images and texts, and there are not many details. It is not difficult to understand things, however, sometimes some detours may be taken and detailed descriptions may be provided to help friends who have just been involved in this field ^_^
1. Establish a testing environment for the development environment of Mobile Terminals
1. Installation Software
The steps are as follows:
A) install Visual Studio 2005 TRM (developer Tools )
B) install ActiveSync 4.5 Developer Preview ( Microsoft The synchronization software supports both PPC and Microsoft intelligence. Mobile phone Inter-communication, used for data transmission testing on the simulation machine)
C) install Windows Mobile 5.0 SDK for pocketpc (PPC Development SDK)
D) install Windows Mobile 5.0 emulator images (Windows Mobile 5.0 Chinese simulation simulator)
After the installation is successful, you can open the Visual Studio 2005 compiler and find the new project selection for "Widnows mobile 5.0 Pocket PC" in "New Project"> "functional devices.

You can find Windows Mobile 5.0 Chinese Simulator"


After the machine is restarted, the gray ActiveSync flag"

".
On the computer Hard Disk The mobile device icon is displayed on the list page.

.
2. Build a test environment
Double-click the ActiveSync icon"

"To go out of the ActiveSync Configuration window and click" connection settings "to set the connection parameters.


Important settings:
Allow USB connection: You can select a test host to test the actual test host.
Allow connection to one of the following ports: When testing with a simulator, select "DMA" here ".
Connect to this machine: Use a simulator to test. Here, select "unit ". Network ".
Select the simulation manager in Visual Studio 2005 compiler to find the Windows Mobile 5.0 Chinese simulator, right-click "Connect", and the simulator is displayed.


Click the refresh button in simulation manager to view the connection status. Green Arrow symbol. Click "insert base ".

Wait for a moment, when the taskbar ActiveSync port symbol turns green, it indicates that the connection is successful"

"
At this time, double-click the computer hard disk list page and the mobile device icon will appear.

In the simulator. File Structure.
3. Set network connection for mobile devices
Click the simulator "start" -- "set" -- "connection" -- "Nic" to set the NIC information.

Select "Default unit Settings" For nic connection, and click "ne2000 Compatible Ethernet" below Driver Program ".

Set LAN connection parameters including IP address and server DNS. after entering the parameters, click "OK" in the upper right corner and exit.


After the NIC is set successfully, click "start"> "set"> "connection"> "connection" to set the connection information.
Select "connection"-"advanced"-"select Network", and select


When "The program automatically connects to the Internet" and "automatically connects to the private network", use "unit Settings" and click "OK" in the upper right corner to save and exit.
We can open the IE browser that comes with the simulator, open a webpage, if set successfully, you can connect to Inernet and LAN.