Alpha router multi-IP settings

The so-called multi-IP setting means that multiple virtual interfaces and different network segments are bound to a single network interface. That is to say, the isolated user can be connected to a single network interface at the same time, when you access the Internet through the gateway, you can also set up different interfaces and CIDR blocks to communicate with each other, because the user accesses the Internet while establishing a bridge for mutual access between users, additional network interfaces are not required.
1. log onto the Alpha router Management page and select multiple IP settings in the left-side Navigation Pane.

2. Click Add to add multiple IP settings, enter the following data, and create a new multi-IP settings www.2cto.com

(1) enter the local network address, (2) enter the local subnet mask, and (3) Select a port transparent bridge, LAN, and WAN from the drop-down menu. Click the Save button to save the multi-IP settings. In this way, it is easy to set multiple IP addresses. If you need them, try setting them. This article is from