Automatically hide IP addresses with nap

NAP (netadjust Anonymous proxy) can automatically hide the real IP address when you browse the Web page, which automatically searches and extracts the proxy server address from the Web page, automatically verifies the speed and anonymity of the proxy server, and helps you remove the expired addresses. You can set the time interval and the degree of anonymity for automatic replacement of the proxy server.

Step 1th: Verify the Proxy server

As shown in Figure 1, this is the NAP user interface, which lists the addresses of a total of 133 proxy servers, but these proxies were previously checked and may now be invalidated. Therefore, before using, we must first validate it, select all from the Validate menu, or press the "CTRL + a" key combination, and NAP will automatically authenticate these proxy servers for approximately 8-10 minutes.

Figure 1 NAP main interface

If you only need to authenticate a proxy server, then click the "verify → select" button on the selection.

2nd step: Eliminate the Invalid proxy server

After the validation is complete, NAP automatically sorts the proxy servers by anonymity, Ping, and the lower the ping value, which means the faster the proxy server accesses. However, taking this approach, NAP does not automatically help you eliminate the actual failed proxy server, such as 133 proxy servers in fact only 1 really available, you must choose from the "Delete" menu under the "Invalid" command.

3rd Step: Open the proxy server

Select an available proxy server, select the one with the lowest ping value, and then follow the "start → open proxy server" command.

Of course, you can also add more proxy servers to the list, to perform the extract from Web command from the Proxy Server menu, as shown in Figure 2, manually type the site address in the list box on the left, note that each row can contain only one URL address, and then tap the Extract button to extract the proxy server address from the specified Web site.

4th step: Set up automatic replacement

We certainly do not want to go to manually replace the proxy server each time, why not set up for NAP automatic replacement? Open the proxy server → settings dialog box, select the Automatically follow Windows startup check box and the Start/Run Auto checkbox in the From Start section, and the time interval for replacing the agent service can be set itself.

In fact, if you are first in touch with NAP, you can choose "Manual" mode or "automatic" mode from the "Start" menu, let the wizard help you, so the operation may be simpler. However, I suggest or choose manual mode, otherwise it will consume a lot of system resources, and very easy error. Can be detected (real IP), verify (check the status of the proxy server), filter (remove the invalid proxy server), sort (by ping value), select, Probe (the IP address after the proxy server is turned on), compare steps to complete the IP address hiding work, If you finally find out that your IP address has been hidden by comparison, then you are done.