Canon 5DMarkII Commercial Photography course for preventing the deformation of the body from being photographed

To the photography enthusiasts to share a detailed analysis of the Canon 5DMarkII to prevent the deformation of the photography of the merchandise photo shoot tutorial.

Tutorial Sharing:

First, set the camera as far as possible in the right and above the wooden box position, and tilt the camera slightly downward. Offset downward to ensure that the product does not deform. At this point to try to use a longer focus lens, you can better avoid deformation. Therefore, the ts-e 90mm f/2.8 is very suitable for commercial photography.

3. Adjust the focal surface with inclination angle

A variety of knobs with operating and locking offsets and dip angles on the moving axis lens. However, because of the different shape of the PTZ used, it is possible to encounter a variety of knobs to hinder the adjustment of the deviation and inclination. Therefore, you need to leave a large space at the bottom of the lens. At this point, you can choose to use the TS-E lens tripod adapter or battery box and handle to solve. When using the moving axis lens, it is often used to display the shot in real time, so it is quite convenient to install the battery box and the handle of two special batteries.

Okay, the above information is small set to all the photography enthusiasts brought to the detailed Canon 5DMarkII to prevent the deformation of the photo photography of the photo shoot of the whole content of the share, you see the photography enthusiasts here, small set believe you now that is very clear method of shooting it, Then the friends are going to follow the small part of the tutorial on the above to take a look at the product to see the effect of it.