Before using USB stick to install Cent6.4 all kinds of frustration, online tutorial basically the same, do not repeat. Then switch to 6.6 and start with the topic.
1. Next. iso file (Everyone is fine, I believe you).
2. Use UltraISO, direct burning USB flash drive, relatively simple, start-to-write hard disk mirroring-pop up another box, right there is a way to start, hdd+, do not forget to choose the U disk. (no problem, get ready to work OK).
3. Start the way to the U disk to start, directly installed cent, you can refer to the online tutorial, more, do not repeat.
4. Put your drclient into the system, you need to install a 32-bit runtime, need to be equipped with IP now, IP with good, Run command $sudo yum install xulrunner.i686, installation is complete, congratulations on your success soon, Then run privillege.sh, recommended to run at the terminal, SH privillege.sh.
5. When the Drclientlinux is running, is it successful.
6. If you fail, shut down the firewall and try again, service iptables stop
Done.
Cent6.6,u disk installation, 64 bit under normal operation Drclient