DELL R420 IPMI Operation Manual

DELL R420 IPMI Operation Manual

1. Configure BIOS and IDRAC

Press F2 to go to the following page and select system blos:

650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131228/0610246391-0.jpg "/>

After entering BLOS, select serial conmmunication:

650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131228/0610243636-1.jpg "/>

Set according to the figure

650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131228/0610243325-2.jpg "/>

After the BLOS operation is complete, return to the first page and select IDRAC SETTINGS

650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131228/06102453Q-3.jpg "/>

Enter NETWOR

650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131228/06102461X-4.jpg "/>

Set according to the following three images

650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131228/0610241514-5.jpg "/>

650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131228/0610242157-6.jpg "/>

Ii. Control-end operation settings

1. Install the installation package in yum

OpenIPMI-libs-2.0.16-14.el6.x86_64, OpenIPMI-2.0.16-14.el6.x86_64, ipmitool. x86_64

2. Common commands

Ipmitool-I lanplus-U root-P maxthon-H 10.0.6.32 user list

View ipmi users on the client

Ipmitool-I lanplus-U root-P maxton-H 10.0.6.32 sol activate

After restarting, redirect the screen to the Local Machine

Ipmitool-I lanplus-U root-P maxton-H 10.0.6.32 sol info 1

1 is a network lan channel. The default value is 1. You can skip this parameter when running the command .)

Ipmitool-H drac ip-U root-P password power off

(Hard shutdown, directly cut off the power supply)

Ipmitool-H drac ip-U root-P password power soft

Soft shutdown, that is, just as clicking it to start the system

Ipmitool-H drac ip-U root-P password power on

Hard boot

Ipmitool-H drac ip-U root-P password power status

Get current power status

Ipmitool-H ip-U root-P password sdr

Print sensor data (device temperature, voltage, fan speed =)

Ipmitool-H ip-U root-P xxxx sensor

Print detailed sensor data

650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131228/0610246410-7.jpg "/>

This article from the "small place of glass" blog, please be sure to retain this source http://luyao959210.blog.51cto.com/1985713/1295156