Detailed analysis on point-to-point connection between Wi-Fi and notebook in wm6.0 System

Detailed analysis on point-to-point connection between Wi-Fi and notebook in wm6.0 System

Http://news.imobile.com.cn/index-a-view-id-60138-page-0.html

We can upgrade the PPC mobile wm5 system to the wm6 system. After the system is upgraded, some built-in settings will be different, and most of the PPC mobile phones in Suwon have built-in WiFi, so that we can
It is convenient to connect to the Internet with a laptop with a wireless network card or a PC with a wireless route. Next we will share with you the "detailed analysis of wm6.0 system WiFi and laptop point-to-point Internet access ".

Up to 830

Most of the current laptops have wireless network adapters, no matter how much they support. Therefore, we can use PPC's wifi to share with the laptop's wifi, of course, the same is true for shared Internet access with desktops with wireless NICs.

First of all, let's set up PPC. Of course, the 5.0 system principle is basically the same. There is no big difference. Just do it.

First, click Start-set-connection settings:

Click "Connect"> "advanced"> "select" network "and select" All units:

Then, click Settings-nic, and the network adapter is connected to: Default unit settings:

Click the option with WLAN wireless to set the IP address and DNS:

Here, we use a specific IP address because the IP address of the wireless network card is automatically changed to 192.168.0.1 when the computer is set to connect to the shared IP address.
Set it to 192.168.0.3. This 3 can also be changed to another number. Of course, it cannot be 1.
The default gateway and DNS must be set to 192.168.0.1, and the wireless pairing between PPC and the computer will be faster after it is set to a specific IP address, because the automatic IP allocation will take a long time.

Next, set the computer end. We will first disable the Windows Firewall on the computer end.

Right-click the network neighbor, we will see several network connections, right-click the wireless network connection.

Click Configure (C), select the ad hoc channel in advanced, and select 802.11b/G11:

Right-click the wireless network connection and set the wireless network configuration next to the general configuration.

Click Advanced (v) to set only computers to computers:

Then set up the Internet shared connection for the ADSL bandwidth:

In Internet Connection Sharing: allow other network users to connect, and select wireless network connection for the home network connection. Then, the IP address of the wireless network adapter will change to 192.168.0.1.

Next, set PPC to enable the WiFi of PPC (enable WiFi in the wireless manager)

After enabling WiFi, click the network card in the settings. Then, the wireless network will be configured.

Click to add a new ...:

Enter the network name as needed. Tick the connection from the device to the device (specific), and click Next. Authentication: public, data encryption: disabled. click Next.

At this time, the computer's wifi is also turned on, and the PPC's wifi is also turned on, We right click the wireless network connection, select 2nd to view the available wireless connections, the computer will view our PPC name, and then click the computer to connect to the PPC.

By now, all the settings have been completed, and PPC can now access the Internet through the wireless network card of the notebook, or ucweb, which is faster than IE, and ggtv can also be watched for free, very smooth, no card.