Detailed steps for installing Ghost Win7 and ghostwin7

Detailed steps for installing Ghost Win7 and ghostwin7

In fact, the installation method of Ghost Win7 is the same as that of XP. You only need to run GHOST in PE or DOS environment and restore the GHOST image to the C disk partition.

Step 1: Run GHOST32. System Recovery is very similar to backup. Run GHOST32. In the displayed window, click OK.

Step 2: select backup or restore. Click Local, Partition, and From Image in sequence.

Step 3: return the partition directory. Click the arrow in the upper-right corner to return to the partition directory.

Step 4: select the restore system image storage folder. Use the black inverted triangle (partition selection key) in the upper right corner to select a storage partition, double-click the partition to enter, find the storage folder of the system backup image, and double-click the folder to open it.

Step 5: restore the system image file. Find the system backup image file and click this file.

Step 6: check and confirm the backup system image. Check whether the displayed partition format, partition capacity, and partition used capacity are the same as those of the backup partition. Click OK for confirmation. If you have doubts, click Cancel to stop.

Step 7: Select Restore partition.

Step 8: Restore the partition and restore the image. Check again here, and then click YES. Don't worry. However, you don't have to worry about it. If you have copied the backup image to the PE boot disk in advance, you can use the PE boot disk to start and restore it.

Step 9: Restore successfully. After the system is restored, you can choose to continue or restart the computer. Generally, restart the computer to restore the system to the original backup state.