Ipmitool Common Operation Instructions

First, switch machine, restart

1. Check the status of the switch machine:

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-p (password for BMC login username) Power status

2. Boot:

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-p (password for BMC login username) Power on

3. Turn off the machine:

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-p (password for BMC login username) Power off

4. Restart:

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-p (password for BMC login username) Power Reset

Second, user management

Note: The [Channelno] field is optional, Channono is 1 or 8;BMC default has 2 users: the user ID is 1 anonymous, user ID 2 admin users;<> field is required; <privilege Level>:2 for user permissions, 3 for operator permissions, and 4 for administrator permissions;

1. View user information:

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-p (password for BMC login username) user list [Channelno]

2. Add Users:

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-p (password for BMC login username) User set name <user id> <username>

3. Set the password:

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-p (password for BMC login username) user Set password <user id> <password>

4. Set User permissions:

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-P (BMC login username password) User priv <user id> <privilege level> [Cha Nnelno]

5. Enable/Disable users:

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-P (BMC login username password) User enable/disable <user id>

Third, IP network settings

Note: The [Channelno] field is optional, the Channono is 1 (Share NIC Network) or 8 (BMC Independent Management Network), set the network parameters, you must first set the IP to static, and then other settings;

1. View network information:

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-p (password for BMC login username) LAN Print [Channelno]

2. Modify whether the IP is static or DHCP mode:

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-p (password for BMC login username) LAN set <ChannelNo> ipsrc <static/dhcp>

3. Modify the IP address:

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-p (password for BMC login username) LAN set <ChannelNo> ipaddr <IPAddress>

4. Modify the subnet mask:

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-p (password for BMC login username) LAN set <ChannelNo> netmask <NetMask>

5. Modify the default gateway:

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-P (BMC login username password) LAN set <ChannelNo> DEFGW ipaddr < default gateway >

Iv. Functions of Sol

Description:<9.6/19.2/38.4/57.6/115.2> where 115.2 represents 115200, that is, *1000 is the baud rate expressed.

1. Set the Sol serial baud rate:

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-P (BMC login username password) Sol set volatile-bit-rate <9.6/19.2/38.4/57.6/115.2 >

2. Turn on the Sol feature:

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-p (the password for the BMC login user name) Sol Activate

3. Turn off the Sol feature:

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-p (the password for the BMC login user name) Sol Deactivate

V. SEL Log View

1. View the SEL log:

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-p (password for BMC login username) sel list

Six, FRU information view

1. View FRU Information:

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-p (password for BMC login username) fru List

Seven, sdr,sensor information view

1. View the SDR sensor information:

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-p (password for BMC login username) SDR

2. View sensor information:

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-p (password for BMC login username) sensor list

VIII. MC (Management Unit BMC) status and control

1. Restart the BMC:

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-p (password for BMC login username) MC Reset <warm/cold>

Ix. setting up the BMC iptables firewall

1. Set a section of IP to access the BMC

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-P (BMC login username password) Raw 0x32 0x76 0x01 0x01 ip1 (0xa 0xa 0xa 0xa) ip2 (0xb 0 XB 0XB 0xb)

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-P (BMC login username password) Raw 0x32 0x76 0x09

2. Set an IP to access the BMC

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-P (BMC login username password) Raw 0x32 0x76 0x00 0x01 ip1 (0xa 0xa 0xa 0xa)

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-P (BMC login username password) Raw 0x32 0x76 0x09

3. Cancel Settings

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-P (BMC login username password) Raw 0x32 0x76 0x08

4. Get firewall settings

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-P (BMC login username password) Raw 0x32 0x77 0x01 0x00

5. Block/Open a port

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-P (BMC login username password) Raw 0x32 0x76 0x02 0x00/0x01 0x00 (portno) 0x22 0x00

6. Cancel the setting of a port (6 is the corresponding cancel operation of 5)

Ipmitool-h (BMC management IP address)-I lanplus-u (BMC login user name)-P (BMC login username password) Raw 0x32 0x76 0x06 0x00/0x01 0x00 (portno) 0x22 0x00

Ipmitool Common Operation Instructions