Msa2000 command line configuration information

1. View Virtual Disks

# Show vdisks

2. view the dynamic service

# Show protocols

3. view the IP Address:

# Show Network-Parameters

4. Set the IP Address:

Set network-Parameters

[IP <address>]

[Netmask <netmask>]

[Gateway <gateway>]

Controller A | B

# Set network-parameters DHCP

# Set network-parameters IP 192.168.0.10 netmask 255.255.255.0

Gateway 192.168.0.1 Controller

Success: network parameters have been changed

5. After the Controller or zookeeper is changed, the zookeeper ID cannot be correct (for example, Zookeeper 2, or zookeeper 3)

# Rescan

Success: Command completed successfully

6. Add offline to vdisk

# Trust

Example

Enable the trust command and then trust vdisk vd1:

# Trust enable

Trust virtual-disk enabled.

# Trust vdisk vd1

Are you sure? Yes

Virtual-disk vd1 has been trusted.

7. Update the FTP firmware:

Login FTP

If FTP is rejected, it indicates that no enableftp service is available.

Put file name Flash

Msa2000 command line configuration information