Repair steps after damage to U disk

If the U disk from the USB port before pulling out, forget to perform uninstall * do, or perform the uninstall operation is not complete, or due to misoperation, and directly from the USB disk pull out, it may lead to disk damage, and sometimes even cause the computer can not identify U disk. If you have not dealt with this situation before, most of you will think that the U disk can not be used, should be thrown into the dustbin, but this is too bad.

Is there a way to restore the function of u disk? The answer is yes, you can follow the steps below:

Turn on Control Panel, administrative tools, Computer Management, storage, Disk Management, right-click on the type "Disk 1", select "Initialize Disk", and click OK. When the initialization is complete, the U disk's status becomes "online" status.

Note that at this time U disk lock to be in the open state, or it will appear as follows: "As the media is written to protect the requirements of the * can not be completed." ”

Right-click on the White box, select New disk partition, go to the New Partition Wizard, click Next, select the partition type (primary, extended, or logical), and generally select the primary disk partition. (Note: The following dialog boxes appear sequentially, so there is no copy of the screen here.) )

Next-Select the disk space capacity: Generally use the default size. Next-Assign a drive letter (or do not assign).

Next-select "Format this partition as follows" to format (file system type, allocation unit size, volume label) (do not select Quick Format).

Next-the Format Wizard completes successfully. Click Finish to wait for its formatting to complete. After the format is completed, the U disk status is displayed as "in good condition", that is, it is done.

This repair method is generally able to restore the U disk. But this kind of repair method also has one disadvantage, is cannot restore the original data on the U disk (the data all loses!!!). If the original data on the U disk is not very important, this method is more applicable.