Windows/system32/config/system workaround for damage or loss due to the following article

Source: Internet
Author: User

This is due to the destruction of your computer's initialization file. The cause of the damage may also be a virus or other cause.

Because Windows startup needs to read the Syatem.ini,win.ini and registry files, assuming that the C packing folder has a Config.sys,autoexec.bat file, the two files will also be read. The crash may occur only if there is an error message for these files.


1, this problem is mostly caused by the quality of the memory, please check and replace the memory test first?

2, hard drive bad way, please repair.

3, the above is not the case, please use the following method?

When XP does not boot up and prompts the following file to be corrupted or missing Windows cannot start?
Windows/system32/config/system need the CD-ROM start press "R" repair, the use of such a method?
If you have to be able to reboot into DOS, if your system is NTFS, then DOS support is required; Boot to DOS with the relevant boot CD or Maxdos?
In the Windows/repair folder first?
Then copy system C:/windows/system32/config/system?
So you can reboot to the desktop?
But then you have no settings, this is the first time you boot to the desktop configuration, you also have to install your drivers and settings?

How to use Windows 2000 system also appears this hint: C:/winnt/system32/config/system or C:/winnt/system32/drivers/ntfs.sys file is missing, Method is also able to use 2000 of the system installation CD into the installation interface press R key to repair.

How not to use 2000 or XP the same occurrence of these two problems, I think there must be hardware problems, the first possible memory quality problems (especially the old memory), the second may be the problem of hard disk, older hard disk appears more.

The computer shows that the system file is missing. Same problem the next day after reloading

It's your hard drive. The following is a test of the isolated hard drive bad channel tool, you downloaded a scan to know?
In Yesky Ftp://ftp1.mydown.com/home1/soft34/fbdisk10.zip download a small software fbdisk (bad disk partition) with a size of only 19.8KB. It can partition the hard drive with bad tracks on its own, and set the bad track to the hidden partition. Execute Fbdisk under DOS, screen prompt start scan hard disk? (y/n), enter Y, start scanning the hard disk, and mark the bad path, then prompt write to disk? (y/n), select Y. The bad word will be quarantined.

C:/windows/system32/config/system damaged or missing WINDOWS cannot start

???? The machine appears such as the following error message:
Windows cannot start because of corruption or loss of the following files:
c:/windows/system32/config/system/

????? In fact, the system file is corrupted, which prevents it from starting properly. The workaround is very simple and goes to Recovery Console repair. The detailed operation method is as follows:

????? Start the system with the system installation disk, press the "R" key to select the repair or recovery option and go to the Recovery Console. The system will actively detect the installed operating system, enter the number 1 to select the operating system to be repaired, as required, type the local Administrator account Administrator password can enter the DOS console interface.
????? Type the following command line, for example:

MD tmp
Copy C:/windows/system32/config/system C:/windows/tmp/system.bak
Copy C:/windows/system32/config/software C:/windows/tmp/software.bak
Copy C:/windows/system32/config/sam C:/windows/tmp/sam.bak
Copy c:/windows/system32/config/security C:/windows/tmp/security.bak
Copy C:/windows/system32/config/default C:/windows/tmp/default.bak
Delete C:/windows/system32/config/system
Delete C:/windows/system32/config/software
Delete C:/windows/system32/config/sam
Delete C:/windows/system32/config/security
Delete C:/windows/system32/config/default
????? (Note: The following steps are to restore the most original system information file stored in the Windows/repair folder to the System folder.) )
Copy C:/windows/repair/system C:/windows/system32/config/system
Copy C:/windows/repair/software C:/windows/system32/config/software
Copy C:/windows/repair/sam C:/windows/system32/config/sam
Copy c:/windows/repair/security c:/windows/system32/config/security
Copy C:/windows/repair/default C:/windows/system32/config/default

????? If all the files are copied, type the exit command again to start.

????? Also, assume that some unknown system boot files are damaged and can be repaired through the Recovery Console. Generally speaking, typing the "Fixboot" command after entering the Recovery Console writes the new partition boot sector to the system partition, which in many cases resolves the problem that the system does not start properly.

Easily recover C:/windows/system32/config/system lost or damaged due to sudden power outage 2006-12-11 09:20

beforeEncountered such a problem has always been a heavy installation system, but this action is slow and annoying, in addition to the system will be all the software to reload all over again, bad words, may also lose the key files saved in the system disk.

After finding the information, it is found that the problem is very easy to solve:

Use the system installation disk to boot, press "R" into the "Recovery Console", assuming that the NTFS partition, you need to enter the administrator identity.
After entry must be in the system folder, such as: "C:/windows"

MD tmp
Copy C:/windows/system32/config/system C:/windows/tmp/system.bak
Delete C:/windows/system32/config/system
The above 3 steps is only to back up your original system information, but the fact is also superfluous, have been damaged, and then backup what use AH

Copy C:/windows/repair/system C:/windows/system32/config/system
This is the most important, the repair folder of the most original system information files, copy them into the corrupted file folder and then type "EXIT" Restart to see that you miss the boot logo.

Just enter the system and you need to install all of your hardware drivers again.

Windows/system32/config/system workaround for damage or loss due to the following article

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.