Xp faq and Analysis

 

Question 1: How to Create a boot disk?

Method:

In the slot --> right click --> choose format --> choose to create A MS-DOS boot disk

Question 2: How to set ADSL?

Method:

Console --> network connection --> Create a new connection --> connect to the Internet

--> Manually set my online --> use a broadband online connection that requires the user name and password.

--> ISP name (whatever you want, such as Hinet...) --> enter the user name and password.

--> The following three options are optional (in fact, the firewall built in XP can be good) --> done

P.S. If you want to enable the system to automatically dial the Internet connection, you just need to capture the online ICON and start it.

Question 3: How to set network neighbors?

Method:

Console --> User Account --> Create a new account

--> Enter the computer's boot account (computer name) and password

--> Select \ "restricted account \" --> complete

 

Question 4: How to enable DMA?

Method:

Go to the device administrator and select ide ata/ATAPI controllers

Advanced Settings in Primary/Secondary IDE Channel

Set all transfer modes to DMA (if available)

The system will automatically turn on the DMA support (you should first set it to support DMA in the BIOS)

Question 5: How do I disable Autorun?

Method:

1. Enable the content of the optical drive, and set all the formats of the optical drive to no action.

2. Use Group Policy (execute gpedit. msc)

Go to computer settings --> system management template --> System

Locate --> disable auto-dial

Right-click and choose --> content, and select "enabled,

Select --> all disk drives,

Apply the function and restart the instance. This method cannot disable the auto-dial function of the music CD.

3. regedit

HKEY_LOCAL_MACHINE \ SYSTEM \ ControlSet001 \ Services \ Cdrom

Change 1 in the execution of Autorun's original 0x00000001 (1) to 0.

After the change, it will become 0x00000000 (0.

 

Question 6: How can XP be shut down?

Method:

Console --> power --> display --> screen saver --> Power Management --> check APM

If not, it should be a BIOS problem.

Question 7: how to disable System sleep?

Method:

The hard disk space occupied by sleep is quite large, so it is better to close it.

Console --> power options --> sleep (do not tick)

 

Question 8: how to disable error return?

Method:

Console ----> system ----> advanced ----> bottom right ---> Error Report ----> close

Question 9: Cannot I install the driver?

Method:

The XP driver cannot be installed because of the number signing relationship. Ignore the number signing:

Console --> System --> hardware --> device Administrator --> driver signing --> skipped

 

Question 10: Why does WinXP pause during execution?

Method:

Start --> online --> show all online --> Local Area Network --> right-click to select content

General --> Select Internet Protocol (TCP/IP) --> press content

Use the first IP address 192.168.0.1 and the second IP address 255.255.255.0.

 

Question 11: Why does XP automatically reboot from time to time?

Method:

My computer --> right-click --> content --> advanced --> enable repair settings

There are three hooks below the system error: Automatic Restart can be canceled

 

Question 12: Can't I find a new command?

Method:

Input in the execution column:

Msconfig => set start function \ Performance Table

Ipconfig => set network card and IP address searching

 

Question 13: How to Make XP automatically come online?

Method:

1. IE --> Tools --> Internet Options --> online

Select \ "dial when the network does not exist \" and pull IE to \ "Start \"

After each boot, you are online!

2. Go to the online content and deselect the "prompt name, password, credential", etc,

Then pull this online to "start 」.

 

Question 14: how to disable automatic update of winXP?

Method:

Console --> System --> automatic update. Go to it and select "close.

Question 15: How to completely install XP?

Method:

A. If it is FAT partition, use Windows 98 or Windows Millennium boot chip to execute FDISK or

FormAT

B. If NTFS partition, use the CD-ROM boot directly through Windows XP optical disk,

Delete and recreate the partition of NTFS.

 

A. go to the partition where Windows XP is located to delete the following directories and files: Pagefile. sys, NTDETECT. COM and NTLDR files (on boot disks such as C:) and some directories and files related to Windows XP

B. Use Windows 98 or Windows Millennium to boot the disk, and run the sys c: command in A:> mode.

Reply the system to Windows 98 or Windows Millennium.

<Windows XP and Windows NT 4.0 or Windows 2000 coexist>

A. go to the partition where Windows XP is located and delete the following directory and file WINNT (make sure this is the main directory of Windows XP, not Windows NT 4.0 or Windows 2000) Pagefile. sys, NTDETECT. COM and NTLDR files (on boot disks such as C:) and some directories and files related to Windows XP.

B. Modify Boot. ini in the root directory of the startup sector:

[Boot loader] The ARC Setting under the setting value changes the preset boot operating system. For example

Windows NT 4.0/2000 is the first partition installed on the first physical hard disk.

Test the following ARC settings:

Default = multi (0) disk (0) rdisk (0) partition (1)

[Operating systems] sets ARC settings under the set value to delete Windows XP boot options

C. Refill the latest service pack version. for example, SP6a for WinNT or SP2 for WIN2000.

 

Question 16: What is the ip address?

Method:

Console --> network online --> enable online content --> check the icon to display and then notify the area

If you want to check the ip address, click "show" --> select "support". This is very convenient.

Question 17: How can I use pppoe to automatically connect to the Internet?

Method:

1. First, make sure that your RasPPPoE connection has been properly dialed.

The SavePassword option has been selected.

2. Right-click the "" button on the "network" Page and click the "content" option.

3. In the displayed window, right-click the online established by RasPPPoE (called preset online) and choose "content ".

4. deselect all the selection boxes on the "Settings" page.

5. You can select "never stop" for the "automatically interrupted when idle for a long time" function in the reset setting 』

6. Check the "automatically online after disconnection" function in the reset setting.

7. Press the OK key below to save the settings

8. Click "start" and click "energy table... Select "console" under "Settings 』

9. Click "scheduled jobs" twice

10. Click "add scheduled job ".

11. Click "Next 』

12. Click "renew instances 』

13. Select "C: \ WinNT \ System32 \ RasPhone.exe" and press enable

14. Select Automatic execution when your computer starts 』

15. Click "Next 』

16. Enter the Logon account and password of the system Administrator.

17. Click "Next 』

18. Click "finish 』

19. Right-click the work icon added in the preceding step and click the content.

20. Change "C: \ WinNt \ System32 \ RasPhone.exe" in the text box

"C: \ WinNt \ System32 \ RasPhone.exe-d preset online 』

21. deselect all the hooks on the "Settings" page.

22. Press "OK" to apply the new settings (the Administrator password is required for confirmation)

23. Click "start" and click "energy table... Select "execute 』

24. In the open text box, enter "Regedit" and press OK.

25. Search for the following addresses

"HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ Winlogon 』

26. Right-click the above address... Select Add \ string 』

27. Change the new string name "new value #1" to "KeepRasConnections 』

28. Right-click the string... Select modify 』

29. Enter the value data in "1" (1 of the number)

30. After the instance is restarted, the settings are automatically connected to the network without logging on to the system.

 

Question 17: how to create an XP sequence-free cd?

Method:

Copy the following text to Winnt. sif

Put it in the i386 data folder.

-----

[UserData]

ProductKey = FCKGW-RHQQ2-YXRKT-8TG6W-2B7Q8

[Data]

AutoPartition = 0

MSDosInitiated = 0

UnattendedInstall = Yes

[Unattended]

UnattendMode = GuiAttended

TargetPath = WINNT

Hibernation = 1

OemPreinstall = No

OemSkipEula = Yes

CrashDumpSetting = 0

DisableDynamicUpdates = Yes

UnattendSwitch = Yes

------

Question 18: Why does the XP shutdown become a traditional drop-down menu? How can I change it back?

Method:

Console --> User Account --> Change User logout or login Method

 

From long minghong's column