How can I easily determine the vro password and original configuration? (1)

With the continuous integration and sharing of resources, the mobility of talents also increases, especially for the job of network management. Often, enterprises, Internet cafes, and other industries may change their network management systems in a year. With the high mobility of the network management profession, the problems of router management come one after another. The previous network administrator modified the vro password. When the second-generation network administrator managed the vro, he found that the vro login failed, or he forgot the password for various reasons and could not log on to the vro, the problem can be solved, but the original configuration is also cleared, which brings a lot of trouble to the workload of the second generation of network management. According to this phenomenon, AI technology engineers share tips and skills for HiPER products as follows ).

Prerequisites: The device must have a TERMINAL/Console port. The software version is later than ReOS 5.0.

Operation Method:

1) connect the RJ45 connector at one end of the random configuration line to the TERMINAL/Console interface of the device and the DB9 connector at the other end to the serial port of the computer.

2) run windows and click Start> program> attachments> communication> Super Terminal to enter the super terminal window. After entering the Super Terminal, enter the new connection name and click OK.

Figure 1

3) Select the COM port of the Computer Used for connection and the serial port connecting the configuration line to the computer), and click OK.

Figure 2

4) Select the number of digits per second: 9600; Data bit: 8; Parity: none; Termination bit: 1; Data Stream Control: none. Click OK.

Figure 3

5) go to the main control page of the Super Terminal and press Enter. Restart the device to view the system startup screen.

After the system starts to enter the REOS boot phase, you will see "Inflate begin .......................... after "OK", enter Three ^ C (Ctrl + c) characters in a row, and the system will enter "emergency mode ".