How to solve the problem of computer boot ringing alarm

We often encounter various malfunctions in the process of using the computer. For example: blue, black screen and the boot after a ringing alarm and so on a variety of failures. If your computer has been ringing the alarm after the boot, this time you will think of the problem of memory. How can we solve this problem? Here is a brief introduction to the computer boot alarm fault resolution.

　　The steps are as follows:

　　In general, the computer turned on the drip called, the Monitor did not respond to two possible.

1, if the song is even, a drop of a sound and drop again, the length of the drop sound is the same. Indicates that the motherboard has poor memory contact.

　　Solution: is to dial out the memory, the golden parts wiped clean.

The memory strip is then plugged into the motherboard. Of course there is a simple way is to hold down the memory bar and gently shake a few. Reboot again.

2, the length of the song is a long and short. This can be judged by the graphics card contact caused by bad. The operation method is similar to the memory piece, pulls out the video card, erases the golden part, then installs back. Reboot the BOOT.