How to solve the problem that WINDOWS8 can't switch ime

There are two kinds of situations in which an input method that is commonly encountered cannot be switched:

One, unable to display the Language bar, using shortcut keys can not switch out, the following figure:

Solution:

You can display it again by resetting the input method settings as follows:

1, open the Control Panel:

2, click "Change Input Method":

3, click on the left side of the "Advanced Settings":

4, will "use the Desktop Language bar (when available)" Check, if not checked through the following settings can also be displayed, but will be reduced to the tray bar;

5, click "Change the Language bar hotkey":

6, see whether set to "hide", if not, you can set to "hide", OK, and then set to "hover on the desktop" or "docked on the taskbar", general can display the input method normally.

Second, the input method can not be switched:

This situation is due to the change of hotkey between the Chinese input method of Windows 8 system to "Win+space" and use this hotkey to switch normally.

If you cannot switch, you will need to see if you have changed the hotkey settings, and see the following methods:

1. Select "Advanced key Settings" on the text service and Input language window, as shown below:

2, click "Change key Order ...", the following figure:

3, you can see if the above settings, if the above settings but can not switch, you may change the settings, and then change back, usually can solve such problems.