I would like to give you a detailed analysis of photoshop software to share with you the tutorial on creating the flame effect of metal burning.
Tutorial sharing:
Final effect
The tutorial uses a self-made Pattern. The custom pattern is very simple. Open the following image and click "edit"> "define pattern.
Metal texture material:
1. Create a 1000*700 pixel canvas with a resolution of 72 pixels/inch, and fill the background with black. Select the text tool and enter the desired text. The font size is larger, as shown in figure 2. The color is yellow-brown # 9B7B0C. The effect is shown in Figure 1.
<Figure 1>
<Figure 2>
2. Double-click the current text layer thumbnail of the layer panel to bring up the layer style, and set the parameters as shown in the following figure.
<Figure 3>
<Figure 4>
3. After confirming, change the filling to: 0%. The effect is shown in the following figure.
<Figure 5>
4. Press Ctrl + J to copy the current layer, as shown in the following figure.
<Figure 6>
5. Press Ctrl + J to copy the current layer, and right-click the blue area behind the layer thumbnail and select "clear layer style". The effect is shown in figure 8.
<Figure 7>
<Figure 8>
6. Set the layer style for the current text layer. The parameter settings are as follows: 9 and 10. After confirmation, change the fill to: 0%. The effect is shown in Figure 11.
<Figure 9>
<Figure 10>
<Figure 11>
7. Press Ctrl + J to copy the current text layer, and clear the layer style as shown in the figure below.
<Figure 12>
8. Set a layer style for the current text layer.
Inner shadow:
<Figure 13>
Gloss: in the mixed mode, the color is orange red: # ff6407, and then the contour line is set, as shown in Figure 15. Other settings are shown in Figure 14.
<Figure 14>
<Figure 15>
Color superposition: the mixed mode is "Soft Light". Color: # 0b0b0b. Other settings are shown in the following figure.
<Figure 16>
Gradient superposition: The hybrid mode is "strong light". The gradient settings are shown in Figure 18.
<Figure 17>
<Figure 18>
Pattern superposition: Select the previously defined pattern.
<Figure 19>
Stroke: Select "gradient" for the fill type, and select the gradient that comes with gradient, as shown in Figure 21.
<Figure 20>
<Figure 21>
9. After confirming, change the filling to: 0%. The effect is shown in the following figure.
<Figure 22>
10. Press Ctrl + J to copy the current text layer and then clear the layer style. The effect is shown in the following figure.
<Figure 23>
11. Set a layer style for the current text layer.
Projection:
<Figure 24>
Exterior Light: The mixed mode is linear light. The color is orange red: # fd7e0d. Other settings are shown in the following figure.
<Figure 25>
Slope and relief: the style "external slope". Other settings are shown in the following figure.
<Figure 26>
Texture:
<Figure 27>
12. After confirming, change the filling to: 0%. The effect is shown in the following figure.
<Figure 28>
13. Press Ctrl + J to copy the current text layer and then clear the layer style. The effect is shown in the following figure.
<Figure 29>
14. Set a layer style for the current text layer.
Inner shadow: in the mixed mode, the color fades. Other settings are shown in the following figure.
<Figure 30>
Inner Light:
<Figure 31>
Slope and relief:
<Figure 32>
Contour lines:
<Figure 33>
Pattern superposition: Select the previously defined pattern.
<Figure 34>
15. After confirming, change the filling to: 0%. The effect is shown in the following figure.
<Figure 35>
Finally, fine-tune the parameters to achieve the final effect.
All right, the above information is the detailed tutorial on creating the flame effect of metal burning for the users of photoshop, users now see this. I believe that you are very clear about the production method, then you can quickly follow the tutorial above to make your desired metal flame.
