How to Use the optimization master to increase the network speed to the highest point

Edit: The method to increase the network speed in China's difficult bandwidth is very popular.

You can use optimization masters to increase the network speed to your highest point. The procedure is as follows:

1. Open master optimization and select System Optimization

2. Select optimization master's Network System Optimization

3. Fill in the maximum transmission unit size: 1492 maximum data segment length: 1452 transmission unit buffer: 262080

4. Click Optimization

5. Restart the machine.

Principle: optimize the computer's receiving buffer and change the maximum transmission unit (MTU) of the network ). What is more understandable is the maximum number of packets transmitted over the network (in bytes ).

The optimal PPPoE (ADSL) is 1492. EtherNet: 1500. Dial-up (modem): 576

If the MTU of the local machine is larger than the MTU of the gateway, large data packets will be split for transmission, which will produce a lot of data packet fragments, increase the packet loss rate, and reduce the network speed. Set the MTU of the local machine to be smaller or the same as the MTU of the gateway to reduce packet loss. Transfer unit buffer: 262080. It does not affect the system.

Remember to change the reserved bandwidth: Enter gpedit. msc at run to enter the management touch ...... Network ...... QOS ...... Limit the reserved bandwidth and change the value from 20 to 0.

Principle: by setting and optimizing the computer's receiving buffer and changing the maximum transmission unit (MTU) of the network, the maximum packet transmitted over the network is accepted (in bytes)