Hp1008win7 driver problem today encountered a very speechless driver problem. Download the For 64-bit Win7 P1008 Driver (ljP1000_P1500-HB-pnp-win64-en, HP LaserJet Hostbased Plug and Play Basic Driver) installed on the HP official website, as a result, an error occurred while installing Copy files to hard disk. The "printer software installer has stopped working" dialog box is displayed ". No matter whether the printer is inserted or pulled out, the error is the same. Considering that there may be a problem with the 64-bit support of the HP driver, another 32-bit Win7 server was found for installation. The result is still incorrect. Later, I made some time to determine the cause of the error. When installing the driver, a directory named HP LaserJet P1000_P1500 Series will be created under C: \ Program Files \ HP. Then, the SB is that the installer will continue to copy an HP directory under this directory ...... As a result, the loop goes down ...... 1. Extract the driver to a directory, such as D: \ ljP1000_P1500-HB-pnp-win64-en. 2. Continue the files in HP1006drv64. cab and HP1006enww64. cab in the directory to the same directory. 3. Plug in the printer. The printer should be found, but the driver cannot be installed. 4. Go to the Device Manager (START, device, and print, right-click, and Device Manager) 5. Find the printer driver with question marks, select Update driver software, and browse the computer to find the driver software. 6. Select the extracted directory. 7. It should have been installed ......