Internet Protocol version 4 configuration

To the new company after the computer to re-install the operating system, from XP replaced by Win7, installed after the system needs to configure IP to network.

Before setting the IP to determine the computer card driver has been installed, otherwise there is no way to carry out the following steps.

1. Open the Control Panel (note "View mode" is "category"), click "View network Status and Tasks" under "Network and Internet" as shown in

2. Click "Change adapter Settings" in the following screen

3, select "Local Connection" in the following screen, right click on "Properties", pop up the "Local Connection Properties" window, in the Change window select "Internet protocol version 4 (TCP/IPV4)", and then click the "Properties" button

4, pop up as shown in the window, in the window to modify the IP configuration, IP configuration according to the address of the company administrator configuration, DNS can be configured according to the following data configuration, after the configuration has been click OK to save the modified results.

Note: DNS must be configured, or there will be a network connection failure after the computer restarts.

Internet Protocol version 4 configuration