excerpt from:http://www.cnblogs.com/yangxia-test/p/6256201.html
adding multiple presses
1, pre-conditions 1) to ensure that the presses are installed on the LoadRunner Agent, and start, the status bar will have a small satellite. 2) If the added press and controller are in the same network segment, it is recommended to turn off the firewall. In the controller press Ping to connect the press, if passed, can be connected. 3) The local RPC service should be turned on and enabled in the Control Panel-management tools-services.
2, Step 1) into the controller, click Scenario-->load Generators menu, after the interface, the default will be a press, that is, the machine. 2) Click Add, add new Press input NAME:IP address, platform:
operating system and other information, click OK3) after the press Add, click Connec: Connect, if the connection is successful, the ready state is displayed, 4) The above steps indicate that the connection is successful, and finally the distribution of the script on the press can be in percent mode.
LoadRunner adding windows multiple presses