Novice U disk Volume production Example

As a first step, we can see that there are a lot of software and files in the v1.96.00 folder.

Generally we only use paramedt-f1-v1.0.20.2 and f1_90_v196_00 two files.

The other two programs are mainly OEM

Step two: Run Paramedt-f1-v1.0.20.2.exe file, fill in relevant data, generate U disk configuration file.

In addition to the mode of the column is required, the other can not fill. The following description:

Customer Information: recommended to fill in, in case you need this data can be read. Note that the PID and vid must follow the 0x???? format, otherwise discarded. Such as:

pid:0x0930 Manufacturer: Kingston

vid:0x6545 Products: DataTraveler 2.0

Revision: PMAP (if software identification, will automatically fill in)

Configuration: It is strongly recommended to check "Auto detect". You cannot guarantee that the capacity is correct by manual filling, because the capacity you see is not necessarily the real capacity. If you want to enlarge (JS's work), want to fill in how much.

Volume Label: Can fill in without filling. Tip: A hidden area (a private area) is an area that can be hidden, not a hidden area,

Serial number: Do not fill in. If you fill out the error, you may need to complete the format to use the U disk

Preformat: Some people suggest not to choose, say unless you suspect that your USB drive has bad zone, or the last mass production failed. No tick will be formatted. Check for low-level formatting similar to hard disk. Check, in the subsequent operation will appear a manual plug u disk operation. But I have to test a few times to check.

Hidden size: Hidden u disk part capacity. The hidden size is the number you fill out. Note that hiding is not a partition hidden, it is actually closed. This portion of capacity is not present unless the mass production operation is performed again.

Patterns: Focus

3 The U disk into a removable disc. If you want to restore the U disk into just buy back the state, use this mode (repair u disk commonly used)

4 the U disk into a private (can be hidden) mobile disks and a floppy diskette. You need to specify the floppy image file in the label "F1-2" ...

7 the U disk into a private mobile disk and a public removable disk. Private removable disks can perform cryptographic operations, and private disks are hidden after encryption.

8 Make a removable disk, can be hidden, can be opened

14 The U disk into a CD or hard disk (note that the hard drive, not removable disk) and a removable disk

21 make a CD-ROM and a removable disk. You need to specify the disc image file in the label "F1-2" ...

We choose 21 mode.

All configured Well, select Save As Kingston.ini file.

Step three: Run the F1_90_v196_00.exe file. Import the Kingston.ini file that you just generated.

If you have just checked "Preformat", the following dialog will appear

Mass production if success is green, otherwise it is red.